Adjusting The Effects - Yamaha Clavinova CVP-203 Owner's Manual

Adjust the Volume Balance and Changing Voices — Mixing Console

Adjusting the Effects

The operations for this page apply to step 2 of the procedure on page 119.
1
DIGITAL
STUDIO
SOUND
CREATOR
DIGITAL
RECORDING
MIXING
BALANCE
CONSOLE
PART CHANNEL
ON / OFF
PART
Each press of this
button switches
among the various
parts/channels.
Determines the amount of effect that is applied to each part. For more information
about the characteristics of each effect, see the Effect Block list on page 123.
2
These determine the effect block and let you assign the effect.
BLOCK............ Determines the effect block (group of similar or related effects).
PART ............... Determines the part to which the Insertion effect is applied. It is effective only
when the block is set to "DSP1" and the CONNECTION parameter is set to
"Insertion" (page 123).
CATEGORY..... The various effect programs (in Type below) are grouped into categories.
This parameter may not be available depending on the selected block.
TYPE ............... Determines the type of effect that is assigned to the selected effect block.
The actual effect types that are available may differ depending on the
selected block.
122
CVP-205/203
Indicates the type name for each effect block.
When the BLOCK parameter is set to REVERB1, CHORUS1, or
DSP1, press this to call up the display from which you can change the
detailed settings for the effects.
Press this to edit and store
the effect (page 122, 123).
Switches among the
effect sections:
REVERB, CHORUS,
and DSP.
There are three effect sec-
tions: Reverb, Chorus, and
DSP (which contains a vari-
ety of effect types). These
are available independently
for the Natural voices and
Regular voices. For details,
refer to the Effect Block list
(page 123).