Parameters Usable In Surround Decoder - Yamaha YHT-693 Owner's Manual

Parameters usable in surround decoder

Dolby PLIIx Music and Dolby PLII Music only
Panorama
Adjusts the soundscape of the front sound field. Sends front left/
right channels sounds to the surround speakers as well as the front
speakers for a wraparound effect.
Off (Default) Disables the effect.
On
Enables the effect.
CT Width
Spreads the center channel sound to the front left and right
speakers to suit your needs or preferences. Set this parameter to 0
for outputting the center sound from the center speaker only, or to 7
for outputting it from the front left/right speaker only.
Adjustable range 0 to 7
Default setting 3
Dimension
Adjusts the difference in level between the front sound field and
the surround sound field. You can adjust the difference in level
created by the software being played back to obtain the preferred
sound balance.
The surround sound gets stronger as you make the value more
negative, and the front sound gets stronger as you make the value
more positive.
Adjustable range -3 to STD to +3
Default setting STD (Standard)
When Neo:6 Music is selected
C.Image
Adjusts the front left and right channel output relative to the center
channel to make the center channel more or less dominant as
necessary.
Adjustable range 0.0 to 1.0
Default setting 0.3
SETUP
Setting sound field program parameters
61
En