Loading Paper - Xerox WorkCentre 4118 Quick Use Manual

quick_use.book Page 9 Thursday, March 2, 2006 9:38 AM

Loading Paper

1
Pull open the paper tray.
Push down on the pressure
plate until it locks into position.
2
Adjust the rear paper guide to
the required paper length.
It is preset to A4 or Letter size
depending on country.
To load another size, lift the
rear guide out of the current
position and into the required
position.
The paper trays can hold a maximum
of 550 sheets of 80 g/m
paper. You can use A4, Letter or Legal
size paper only.
3
Fan the paper and insert it into
the tray.
If loading Letterhead, ensure
the design is face-up and the
top edge of the sheet is placed
at the right side.
Rear
Guide
2
(20 lb) plain
9