Replacing Main Burners - Weber E-670 Owner's Manual

replaCinG main burners

Note: Your Summit ® gas grill must be off and cool.
A) Turn gas off at source .
B) Disconnect gas supply .
C) Remove cooking grates .
D) Remove Flavorizer bars .
®
E) Remove smoker box (if included in your model) .
removing Control panel
Parts required: Phillips screwdriver and a towel .
A) Remove the burner control knobs (1) .
B) Open both doors and place a towel on top of the doors .
this will protect the control panel and tops of the doors from getting
scratched on the next step.
C) Remove the screws from the underside of the control panel with a Phillips
screwdriver (2) .
D) Tilt the control panel forward and lift up and away from the grill (3) . (For Summit
models with LED features: be careful not to break or disconnect the wires for the
control panel LEDs .)
E) Place the control panel on the towel covering the door assemblies (4) .
2
F) Remove the two screws that secure the manifold to the cookbox . Pull manifold
assembly out from the manifold frame (5) .
G) Pull the selected burner tube(s) from manifold frame and replace with new burner
tube(s) (6) .
34
mAINTENANcE
®
the grill illustrated
may have slight
differences than the
model purchased.
3
7
6
1
4
6
5