Page 1
DOUBLE SHOE RACK 1929 & 1929-1 DESIGNED BY FROST DENMARK PRODUCT DETAILS, TECHNICAL DETAILS AND FITTING INSTRUCTIONS 1929: 619 mm 1929-1: 1019 mm 300 mm 1929: cc600 mm 1929-1: cc1000 mm MATERIAL: STAINLESS STEEL AVAILABLE IN THE NINE FROST FINISHES:...
Page 2
DOUBLE SHOE RACK Ø8x38 mm Ø6x39 mm Hex key 3 mm MOUNTING Mount the eight crossbars by gently inserting them into the pre-made holes in the side frame , by using small rotational movements. For some finish models, you may need to apply a bit more force to fully insert the crossbars Mount the opposite side frame onto the ends of the...
Page 3
Use the sixteen Ø4x10 mm screws to fasten the eight crossbars to the two side frames. Tighten all the screws with the 3 mm enclosed hex key MOUNTING ON THE WALL Place the Shoe Rack in the desired position and mark the screw holes as illustrated, with a CC distance of either 600 or 1000 mm.
Page 4
EXCLUSION OF LIABILITY FROST accepts no liability whatsoever for damage to persons or property that occurs or has occurred as a result of improper installation or maintenance, particularly if the safety instructions and other points to note listed are not or have not been observed in full.
Need help?
Do you have a question about the 1929 and is the answer not in the manual?
Questions and answers