Cassette Recorder; Playing A Cassette; General Information On Recording - Philips Az 8050 Manual

CASSETTE RECORDER
Playing a cassette
1 Set the POWER selector to TAPE.
2 Press STOP-EJECT ■ to open the cassette compartment.
3 Insert a recorded cassette with the open side downwards.
4 Press PLAY ► to start playback.
5 By pressingor ►► fast winding of the tape is possible in
both directions.
6 To stop the tape, press STOP-EJECT ■.
Note: The keys are automatically released at the end of the tape.
General information on recording _
- Recording is permissible insofar as copyright or other rights
of third parties are not infringed.
- For recording on this set you should use a cassette of the type
"NORMAL" (lEC type I). This deck is not suited for recording on
cassettes of the type "CHROME" (lEC H) or "METAL" (lEC IV).
- The recording level is set automatically. The controls VOLUME
and DBB do not affect the recording.
' At the very beginning and end of the tape, no recording will take
place during the 7 seconds when the leader tape passes the
recorder heads.
Protecting tapes from accidental erasure
• Keep the cassette side to be safeguarded in front of you and
break out the left tab. Now. recording on this side is no longer
possible.
• To render this safeguard ineffective, cover the aperture with a
piece of adhesive tape.
10