The Back Panel - TP-Link TD-W8968 User Manual

TD-W8968

1.3.2 The Back Panel

The Router's ports, where the cables are connected, and RESET button are located on the back
POWER: The Power plug is where you will connect the power adapter.
ON/OFF: The switch for the power.
WPS: The switch for the WPS function. For details, please refer to
RESET: There are two ways to reset the Router's factory defaults.
Method one: With the Router powered on, use a pin to press and hold the Reset button for at
least 5 seconds. And the Router will reboot to its factory default settings.
Method two: Restore the default setting from "Maintenance-SysRestart" of the Router's
Web-based Utility.
WiFi: The switch for the WiFi function.
USB: The USB port connects to a USB storage device or a USB printer.
LAN1, LAN2, LAN3, LAN4/WAN: Through these ports, you can connect the Router to your
PC or the other Ethernet network devices. Enable EWAN function and you will be able to
connect to Cable/FTTH/VDSL/ADSL device.
ADSL: Through the port, you can connect the router with the telephone. Or you can connect
them by an external separate splitter. For details, please refer to
Antennas: Used for wireless operation and data transmit.
300Mbps Wireless N USB ADSL2+ Modem Router User Guide
Figure 1-2
6
4.6.2 WPS Settings.
2.3 Connecting the Router.