Rockler Dust Right Instructions Manual
  1. Manuals
  2. Brands
  3. Rockler Manuals
  4. Vacuum Cleaner
  5. Dust RIGHT
  6. Instructions manual
Rockler Dust Right Instructions Manual

Rockler Dust Right Instructions Manual

4" wall mount cyclone dust separator
Hide thumbs Also See for Dust Right:
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

4" Wall Mount Cyclone Dust Separator Instructions
Effective August 2023
Review full instructions prior to use for important safety information.
Always check Rockler.com to confirm that you are using the most recent version of instructions for your product.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Dust Right and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Rockler Dust Right

Summary of Contents for Rockler Dust Right

  • Page 1 4" Wall Mount Cyclone Dust Separator Instructions Effective August 2023 Review full instructions prior to use for important safety information. Always check Rockler.com to confirm that you are using the most recent version of instructions for your product.

  • Page 2: General Safety Warnings

    • Keep children and bystanders away from the tool the instructions and safety warnings for your product (see the instructions link on the product page at Rockler.com). operating area; • Do NOT use power tools in explosive environments, or in the presence of flammable liquids, fumes or dust;...
  • Page 3 PRODUCT SPECIFIC SAFETY WARNINGS > Be sure to read, understand and follow all instructions > Do NOT put any object into openings. Do NOT use with and safety warnings in the owner’s manual that came any opening blocked by debris; keep free of dust, lint, hair, with the dust collector to which you will be connecting and anything that may reduce airflow.

  • Page 4: Parts List

    Fig. 1 Fig. 2 Assembly PARTS LIST Quantity 1. Attach the curved Frame Bottom Rails (1) and Frame Middle Rails (2) to the Frame Uprights (3) using all 32 M5 x 6mm Frame Bottom Rail Pan-Head Screws (4) and the Smaller Hex Key (21). The Frame Middle Rail Uprights have integrated weld nuts to accept the screws.
  • Page 5 Fig. 3 Fig. 4 Fig. 5 so the inlet is where you want it to be. If you installed an Before you begin the next step, it is M6 x 14mm Pan-Head Screw (11) in the hole directly beneath important to decide which way you want the inlet on the the inlet of the Housing (10) in Step 4, fit it into the holes Housing (10) to face in your application.

  • Page 6: Choosing A Mounting Location

    PARTS LIST Quantity 15 Separator Outlet 16 Separator Cone 17 Bag 18 Clamp 8. Fit the Separator Cone (16) into the opening of the External Cone (13) and up toward the opening in the Housing (10). From the top, fit the Separator Outlet (15) into the opening in the Housing and then thread it into the Separator Cone until the parts are snug.
  • Page 7 16" on center – or if you are mounting to a finished wall – you Outer Edge MUST first bolt a horizontal 2 x 6 wooden cleat to wooden wall of Stud studs and then mount the Dust Collector to the cleat. The cleat Centerline must be long enough that both ends can be bolted to a wooden wall stud.

  • Page 8: Emptying The Bag

    Tip the Bag assembly upside down to empty the Bag (17) through the hole in the Frame Cap (5). Then reinstall the Bag assembly on the bottom of the External Cone (12). Check Rockler.com for updates. If you have further questions, please contact our Technical Support Department at 1-800-260-9663 or support@rockler.com Fig.

Table of Contents