Download Print this page
Kohler K-3936 Installation Manual
Kohler K-3936 Installation Manual

Kohler K-3936 Installation Manual

Apron-front kitchen sink
Hide thumbs Also See for K-3936:

Advertisement

Quick Links

Installation Guide
Apron-Front Kitchen Sink
Français, page "Français-1"
Español, página "Español-1"
1166709-2-B

Advertisement

loading
Need help?

Need help?

Do you have a question about the K-3936 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kohler K-3936

  • Page 1 Installation Guide Apron-Front Kitchen Sink Français, page “Français-1” Español, página “Español-1” 1166709-2-B...
  • Page 2: Tools And Materials

    300 lbs (136 kg). Locate the fasteners for easy access in the event the sink needs to be removed in the future. For K-3936 Only: This sink is intended for installation into a standard 30″ base cabinet. For K-3943 and K-3945 Only: This sink is intended for installation into a standard 36″...
  • Page 3 Before You Begin (cont.) Observe all local plumbing and building codes. Kohler Co. 1166709-2-B...
  • Page 4 B = Top of Cabinet to Top of Doors IMPORTANT! Before installing this sink, verify the opening height (A) is less than the apron height and the distance to the top of the doors (B) is greater than the apron height. Roughing-In 1166709-2-B Kohler Co.
  • Page 5 Carefully cut away the top rail and center support. Notch the cabinet as shown to accommodate the thickness of the sink rim. Top of sink should be flush with the top of the cabinet when installed. Kohler Co. 1166709-2-B...
  • Page 6 Secure the supports with construction adhesive and screws (not provided). Cut four lengths of support framing to extend from the bottom of the installed supports to the floor of the cabinet. Secure the vertical supports with construction adhesive and screws (not provided). 1166709-2-B Kohler Co.
  • Page 7 Apply a bead of 100% silicone sealant to the top of the support framing. Lower the sink onto the support framing, and push in to ensure that the apron is flush with the front of the cabinet. Kohler Co. 1166709-2-B...
  • Page 8 Apply a bead of 100% silicone sealant around the side and back of the sink. Install the countertop. Apply a thin bead of 100% silicone sealant where the sink meets the countertop and cabinet. Immediately wipe away any excess sealant. 1166709-2-B Kohler Co.
  • Page 9 1-5/8" (41 mm) 5. Secure the Sink NOTE: Anchors are pre-installed by the countertop manufacturer. Install the clips to the countertop. Ensure that each clip engages the rim. Tighten evenly. Wipe away any excess sealant. Kohler Co. 1166709-2-B...

This manual is also suitable for:

K-3945K-3943K-3945-naK-3936-naK-3943-na