Messages - Haier D900 User Manual

D900 User Guide
5.6 Erase all
Before accessing this option, you will be asked to enter lock code (The default is 000000).
This feature allows complete erasing of all contacts either in RUIM card memory or Phone
memory, the information thus deleted is unrecoverable.
5.7 Speed dial
Use this menu to assign a speed dial number (02 to 99) for 98 of your most frequently
dialled numbers.
1) To access contact numbers that have been assigned numbers from 1 to 9, press and
hold down the assigned number, and the contact number will automatically be dialled.
2) To access contact numbers that have been assigned numbers from 10 to 99, type the
assigned number followed by '#' key and then press the send key.
For example, to speed dial the 11th entry, type 11# and press the send key.
Default speed dial number is: 1=Voice mail (*777)
5.8 Memory status
Check the number of contacts you have stored in the phone's memory and on the RUIM
card.

6. Messages

6.1 Write message
Allow you to edit text message. When composing text messages, check the number of
characters allowed in the top-right corner of the screen. Press numeric key to input
corresponding characters, and then press the left soft key to access the following options:
Send, Insert templates, Send to group, Insert number and Save message.
6.2 Inbox
Inbox contains the received messages. From the message view, you can press the left
soft key to access the following options: Reply, Forward, Use number and Erase.
6.3 Outbox
You may store sent messages and unsent messages to outbox according the MSG
Settings. You can retrieve these messages and forward them to other contacts, or resend
the message, or erase the message if it is no longer required.
6.4 Draft
You may store saved messages to draft. You can retrieve these messages and send them
to any contact or erase the message if it is no longer required.
6.5 Voice mail
The voice mailbox is a network service and you may need to subscribe to it. For more
8