Haier C2076 User Manual page 12

Press the Send Key, The first participant is put on hold.
When the second participant picks up, press the Key 3 & then press Send Key to connect
the calls. (After the conference is initiated, Send key can be used to switch between both
parties).
To end the conference call, press the End Key.
Notice:
Whether conference calling can be enabled or not depends on whether the network
provider provides this facility and whether you have applied for such facility.
4. Answering the call
When the call is incoming
To answer the call, press the Send Key.
To reject the call, press the End Key.
Press the right soft key to mute the ring tone, after that re-pressing the right soft key can
reject the call.
Pressing the left soft key can reject the call and reply rejected SMS, you can edit the
rejected message in messaging.
If you have set random key to answer the call, you can use any key except end key, right
soft key and left soft key to answer the call.
If you have connected the earphone, you can use earphone key to answer the call.
8