Patriot Lighting DH8096 Manual
Patriot Lighting DH8096 Manual

Patriot Lighting DH8096 Manual

1-light outdoor wall light

Advertisement

PACKAGE CONTENTS
A
B
HARDWARE CONTENTS Note: Hardware not shown actual size.
AA
CC
EE
FF
HH
Questions, problems, missing parts?
Before returning to your retailer, call our customer service at 1-800-887-6326
Monday – Friday 9:00 a.m. – 5:00 p.m. CST
Mounting Plate Unit
X1
Wire Connector
X3
Rubber Pad
X2
Assembly Kit
X1
Rubber Pad-a (1 extra included)
X3
1-Light Outdoor Wall Light
TEST
OFF
BB
DD
GG
II
SKU Number: 356-3836
Model Number: DH8096
PC
AUTO
Mounting Screw
X2
Bolt Nut
X2
Decorative Cap
X1
Set Screw (1 extra included)
X3
230515

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DH8096 and is the answer not in the manual?

Questions and answers

Summary of Contents for Patriot Lighting DH8096

  • Page 1 SKU Number: 356-3836 1-Light Outdoor Wall Light Model Number: DH8096 Questions, problems, missing parts? Before returning to your retailer, call our customer service at 1-800-887-6326 Monday – Friday 9:00 a.m. – 5:00 p.m. CST PACKAGE CONTENTS TEST AUTO HARDWARE CONTENTS Note: Hardware not shown actual size.
  • Page 2: Safety Information

    SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. WARNING ● Turn off electricity at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). ●...
  • Page 3 ASSEMBLY INSTRUCTIONS (continued) 4. Attach the backplate (A) of the 3. Pull out the source wires from the fixture to the mounting plate outlet box. Make wire connections unit (AA) by aligning and using wire connectors (CC) as Fixture inserting the two headless follows: screws from the mounting plate •...
  • Page 4: Functions And Operations

    FUNCTIONS AND OPERATIONS “TIME” Knob Step 1: Rotate the sensor lens from left side to right side “LOW LEVEL” Knob to show the adjustable knobs and slide switch. “SENS” Knob (See Fig.1) Small Screwdriver (not included) Step 2: Adjust time, low level brightness and sensitivity by turning the knobs and choose the mode you want by sliding the switch.
  • Page 5 ASSEMBLY INSTRUCTIONS (continued) FUNCTIONS AND OPERATIONS (continued) ASSEMBLY INSTRUCTIONS (continued) NOTE: Where you install your light is important: 1. The sensitivity of the motion sensor will increase as the Be sure the light is mounted straight on the wall; environmental temperature gets colder. For best performance, otherwise, the detection distance may be limited.
  • Page 6: Care And Maintenance

    CARE AND MAINTENANCE ● To clean, turn off and wipe with a damp, non-abrasive cloth. TROUBLESHOOTING Refer to following information to solve your problems. SOLUTION DAY/NIGHT SYMPTOM POSSIBLE CAUSE Slide switch is not set in the test Set the slide switch in the " TEST " mode for testing. mode.
  • Page 7 If unable to fix any of the above issues, please consult a certified electrician. FIVE-YEAR LIMITED WARRANTY: If, during normal use, this PATRIOT LIGHTING lighting fixture breaks or fails due to a defect in material workmanship within five (5) years from the date of original purchase, simply bring this lighting fixture with the original sales receipt back to your nearest MENARDS retail store.

This manual is also suitable for:

356-3836

Table of Contents