Microwave Ovencontrol; Progress Bar; Start/Add 30 Seconds; Easy Minute Feature - Whirlpool GH5184XPQ - 1.8 Cu. Ft. Microwave Oven Use And Care Manual

MICROWAVE OVENCONTROL
SENSOR
POPCORN BARED DINNER
POTATO PLATE
REHEAT COOR DERR05I
COOK
WARM
POWER HOED
The START control shares function with the Add 30 Seconds
feature. The START pad will start any function. If not touched
within 5 seconds after touching a pad, "START?" will appear on
the display as a reminder. If not touched within 5 minutes after
touching a pad, the display will return to the time of day mode
and the programmed function will be canceled.
If cooking is interrupted, touching the START will resume the
preset cycle.
The ADD 30 SEC. control starts the oven at 100% power for
30 seconds, and adds 30 seconds of cook time with each
additional touch of the control. Once cooking begins, cook power
or cook time may be changed manually by touching the
appropriate display area and entering the new setting.
The numerical pads 1-5 share function with the Easy Minute
controls. When one of these controls is touched (while no
function is operating), the oven will begin cooking at high power
for 1-5 minutes, depending on which pad is touched. After
cooking begins, the Easy Minute controls return to their normal
numerical pad function.
The CANCEL pad stops most functions except for the Timer,
Child Lock and Demo Mode.
The microwave oven will also turn off when the door is opened.
Close the door and touch START control to resume the cycle. A
sensor cooking cycle may not be resumed if interrupted by
opening the door.
When power is first supplied to the microwave oven, a ":" will
blink on the display. Touch CANCEL to stop the blinking. If the ":"
blinks on the display at any other time, a power failure has
occurred. Touch CANCEL and reset the clock if needed.
If "RETRY" blinks on the display for 1 second, an invalid value
has been entered. Retry your entry.
When the microwave oven is in use, the display shows cooking
power, quantities, weights and/or prompts. When the microwave
oven is not in use, the display shows the time of day or Timer
countdown.
The microwave oven is preset with shortcut number codes. A
number code includes one or more of the following: cooking
power, cook time and food quantity or weight. See the charts in
the "Cooking" and/or "Reheating" sections for additional
information.
The progress bar is a visual picture of the estimated running time
of a cooking cycle. It will appear during all cook cycles except
Warm Hold. The lines in each of the segments will light from left
to right as the time nears the end. When all 15 lines (all
3 segments) are lit, the cooking cycle is complete.