Alternating Current (AC)
9 Be sure all electric devices including the lines
and plug connections are in good condition
before connection to the generator.
9 Be sure any electric devices are turned off
before plugging it in.
9 Be sure the total load is within generator rated
9 Be sure the receptacle load current is within
receptacle rated current.
1. Wind the power lead 2 or 3 turns around handle.
2. Start the engine.
3. Plug in to the AC receptacle.
4. Make sure the AC pilot light is on.
1 AC pilot light
5. Turn the economy control switch (Black) to the " I "
(ON) position and turn on any electric devices.
1 " I " (ON)
The economy control switch must be turned to "3"
(OFF) when using electric devices that require a large
starting current, such as a compressor or a submergi-
– 15 –