5
Listen to FM radio
Note
•
Keep the clock radio away from other electronic
devices to avoid radio interference.
•
For better reception, fully extend and adjust the
position of the FM antenna.
Tune to FM radio stations
1
Press
to turn on the clock radio.
2
Press and hold TUN
The clock radio tunes to a station with
strong reception automatically.
3
Repeat Step 2 to tune to more radio stations.
To tune to a station manually:
Press TUN
/TUN
to select a frequency.
Note
•
The tuning grid of the clock radio is 50KHz, the radio
frequency on the display panel will increase 0.1MHz
TUN
/TUN
by pressing
Store FM radio stations
automatically
In FM tuner mode, press and hold
3 seconds.
The unit stores all the available FM radio
stations automatically and broadcasts the
�rst station.
/TUN
for 3 seconds.
twice.
SCAN
for
Note
•
You can store a maximum of 20 FM radio stations.
Store FM radio stations
manually
1
In FM tuner mode, tune to an FM radio station.
2
PRESET
Press and hold
programming mode.
The preset number begins to blink.
3
Press TUN
/TUN
4
PRESET
Press
again to con�rm.
5
Repeat steps 1 to 4 to store more FM radio
stations.
Tip
•
To remove a pre-stored station, store another station
in its place.
Select a preset radio
station
Option A:
In FM tuner mode, press
number.
Option B:
1
In FM tuner mode, press
2
Press TUN
/TUN
Note
•
After 3 seconds, preset radio station will be con�rm
automatically.
for 3 seconds to activate
to select a number.
PRESET
to select a preset
PRESET
.
to select a preset radio station.
EN
7
Need help?
Do you have a question about the 4000 Series and is the answer not in the manual?