Table of Contents
Advertisement
Loading Plain Paper / Photo Paper in Rear Tray
You can load plain paper or photo paper.
You can also load envelopes on the rear tray.
Loading Envelopes in Rear Tray
1.
1. Prepare paper.
Align the edges of paper. If paper is curled, flatten it.
Note
•
• Align the edges of paper neatly before loading. Loading paper without aligning the edges may
cause paper jams.
• If paper is curled, hold the curled corners and gently bend them in the opposite direction until the
•
paper becomes completely flat.
For details on how to flatten curled paper, see
Scratched/Ink Blots/Paper Curl/Paper Is Smudged During Automatic 2-sided
•
• When using Photo Paper Plus Semi-gloss SG-201, even if the sheet is curled, load one sheet at a
time as it is. If you roll up this paper to flatten, this may cause cracks on the surface of the paper
and reduce the print quality.
2. Open the rear tray cover (A) and then pull up the paper support (B).
2.
in
Printed Surface Is Smudged/
Check3
36
Printing.
Advertisement
Table of Contents
Need help?
Do you have a question about the MAXIFY GX6100 Series and is the answer not in the manual?