Page 1
RE 6/RE 60/RE 600 anual Electrical Tools 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.TestEquipmentDepot.com...
RE 6/RE 60/RE 600 Electrical Tools Safety Symbols In this operator’s manual and on the product, safety symbols and signal words are used to communicate important safe- ty information. This section is provided to improve understanding of these signal words and symbols. This is the safety alert symbol.
Page 3
RE 6/RE 60/RE 600 Electrical Tools (GFCI) protected supply. Use of a GFCI reduces • Disconnect the plug from the power source and/or the risk of electric shock. remove the battery pack, if detachable, from the power tool before making any adjustments, chang- Personal Safety ing accessories, or storing power tools.
RE 6/RE 60/RE 600 Electrical Tools • Do not use a battery pack or tool that is damaged clear during use and wear appropriate protective equip- or modified. Damaged or modified batteries may ment, including eye protection exhibit unpredictable behavior resulting in fire, explo- •...
Page 5
RE 6/RE 60/RE 600 Electrical Tools Loop the RIDGID ® QuickChange System™ (QCS™) Coupling Type Label that allows the installation and use of a variety of inter- changeable heads. The RE 600 series of Electrical Tools have dedicated (non-interchangeable) heads. All heads (both interchangeable and dedicated) can be Pressure LED Work...
RE 6/RE 60/RE 600 Electrical Tools Green Solid Light Blinking Light Icon Meaning Green Tool ON, ready to use. Green Battery low. Tool will not operate. Recharge battery/Insert fully charged battery. Tool out of Specification temperature range. Bring tool and battery to correct operating temperature range. Indicates service interval approaching.
RE 6/RE 60/RE 600 Electrical Tools Die/Electrical Connector Compatibility Charts for these Retaining tools with various heads. Balls Standard Equipment Refer to the RIDGID catalog for details on equipment supplied with specific tool catalog numbers. Selection of appropriate materials and joining NOTI E methods is the responsibility of the system designer and/or installer.
Page 8
RE 6/RE 60/RE 600 Electrical Tools Large forces are generated during use that can Operation break or throw parts and cause injury. Keep all 1. With dry hands, install a fully charged battery into the unnecessary personnel away from work area. Stand electrical tool.
RE 6/RE 60/RE 600 Electrical Tools Store in a dry, secured area that is out of Required Maintenance By RIDGID WARNING reach of children and people unfamiliar with the Electric Independent Service Center Tool. The electrical tool is dangerous in the hands of The Electrical tool must be serviced at set intervals by a untrained users.
RE 6/RE 60/RE 600 Series The RIDGID RE 6/RE 60/RE 600 Family of Electrical Catalog Tools conform to IEC61000-6-5 (Ed. 1.0) Electromagnetic Description Compatibility (EMC) Part 6-5: Generic Standards – Im - 44693 18V 2.0Ah Battery (North &...
Page 11
EC DECLARATION RIDGID ® RE 6/RE 60/RE 600 Electrical Tools EC DECLARATION OF CONFORMITY 2006/42/EC, 2014/30/EU, 2011/65/EU, 2012/19/EU IEC 60745-1:2006, EN 55014-1:2006+A1:2009+A2:2011, EN 55014-2:1997+A1:2001+A2:2008...
Need help?
Do you have a question about the RIDGID RE 6 and is the answer not in the manual?
Questions and answers