Health And Safety; Document Symbols; Safety Warnings; Product Recycling And Disposal - Abb Ak100 Upgrade Instruction Manual

A K 1 0 T O G A H | U P G R A D E I N S T R U C T I O N | I N/A K 1 0 -TO - G A H - E N R E V. A
1

Health and safety

1 .1 Document symbols

Symbols that appear in this document are explained below:
WARNING
WARNING indicates a hazardous situation which, if not
avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not
avoided, could result in minor or moderate injury.
NOTICE
NOTICE is used to address practices not related to physical
injury.
Note:
Indicates operator tips, particularly useful information or
important information about the product or its further uses.
'Note' does not indicate a dangerous or harmful situation.

1 .2 Safety warnings

WARNING
Electricity hazard
Make sure that the system is fully isolated from power
supplies or other external wiring before you start this
procedure.
NOTICE
Remove the panel from the installation and take it to a clean
work area when you do the rewiring.
NOTICE
Put bubble wrap or other proctective material on the work
surface to prevent damage to the panel while you do the
upgrade procedure.

1 .3 Product recycling and disposal

(Europe only)

ABB is committed to ensuring that the risk of any
environmental damage or pollution caused by any of
its products is minimized as far as possible. The
European Waste Electrical and Electronic Equipment
(WEEE) Directive that initially came into force on
August 13 2005 aims to reduce the waste arising from
electrical and electronic equipment, and improve the
environmental performance of all those involved in
the life cycle of electrical and electronic equipment. In
conformity with European local and national
regulations, electrical equipment marked with the
above symbol may not be disposed of in European
public disposal systems after 12 August 2005.
NOTICE
For return for recycling, please contact the equipment
manufacturer or supplier for instructions on how to return
end-of-life equipment for proper disposal.

1 .4 Information on RoHS Directive 2011/65/

EU (RoHS II)

ABB, Process Automation, Measurement & Analytics,
fully supports the objectives of the RoHS II directive.
All in-scope products placed on the market by PAMA
on and following the 22
compliant to the RoHS directive, 2011/65/EU.
of July 2017, will be
nd
3