Cleaning After Use; Care, Cleaning And Storing - Breville Wizz BEM200 Series Instructions And Recipes Manual

Care, cleaning and storing your Breville Wizz™
electronic mixer

Cleaning after use

1. Always ensure that the Speed Control Dial
is in the 'OFF' position and that the power is
switched off at the power outlet. Then remove
the power cord from the power outlet.
2. Eject the beaters/dough hooks from the mixer.
3. To remove the motor head for cleaning, press
the mixer release lever and lift the motor head
from the mixer stand (Fig 6).
Fig 6
4. Wipe the motor head, mixer stand and
revolving turntable with a soft, damp cloth
then dry thoroughly.
5. Wipe any excess food particles from the
power cord.
6. Wash the mixing bowls, beaters and dough
hooks in warm soapy water with a soft clean
cloth. Rinse and dry thoroughly. Mixing bowls
may also be washed in a dishwasher.
NeveR ImmeRSe tHe mIxeR, poWeR CoRd oR plug IN WateR oR aNy otHeR lIQuId.
10
7. Do not allow the mixing bowls/beaters/dough
hooks to soak in water for an extended period
of time, as this may damage the metal finish.
do not use abrasive scouring pads or cleaners
when cleaning the mixing bowls/ beaters/dough
hooks as these may scratch the surface. also
ensure that the mixing bowls/beaters/dough
hooks are not soaked in water for extended
periods of time, i.e. for several hours or overnight,
as this may damage the metal finish. do not
wash or soak the mixer stand in water or any
other liquid. Clean with a damp soft cloth and dry
thoroughly. do not allow water or any liquid to
enter the gear system as damage may result.