NAIM CD5I Owner's Manual page 20

Flash and
AV (av processor mode)
Page 1 of 3
input+ Selects the next input.
input- Selects the previous input.
mode- Selects the previous decode mode.
mode+ Selects the next decode mode.
osd Selects On Screen Display operational mode
and shows current system status.
disp
Switches the processor display on and off.
midn Selects midnight operational mode.
menu Used in setup mode.
numeric
Directly selects processor inputs.
Page 2 of 3
The master key functions on
Page One. However, selection of
of the numeric keys to selection of processor decode modes.
Page 3 of 3
up Selects the previous AV setup parameter or
moves the OSD cursor upwards.
down Selects the next AV setup parameter or moves
the OSD cursor downwards.
left Selects the previous AV parameter value or
moves the OSD cursor to the left.
right
Selects the next AV parameter value or moves
the OSD cursor to the right.
input Selects into input setup mode.
spkr Selects speaker setup mode.
enter Confirms option selection during OSD control.
clear Clears option selection during OSD control.
numeric No function.
17.3 CD Track Programming
In CD mode the prog
tracks and their play order to be programmed.
To program a play order select a track number from the
keypad followed by the
complete. During selection, the track number indicated in the
display will be followed by either
—
track is selected,
The prog key can also be used to delete tracks from a play
order. To delete a track, press and hold the
prog indicator in the CD display illuminates then delete the
track or tracks using the
by a further operation of the
number indicated in the player display will be followed by either
— C
or or no display.
that the track can be deleted while no display indicates that this
is the only track remaining and therefore cannot be deleted.
A random play order can be programmed (from stop with no play
order already in place) by pressing
to program a reverse play order, press
Play orders can be reviewed by pressing
is either stopped or playing. The player display will then scroll
through the selected tracks. The prog indicator on the player
display will illuminate when a play order has been programmed.
To clear the program memory press and hold the
18
NARCOM 3
AV Page Two are duplicates of
Page Two switches the function
key (display Page Two) enables specific CD
prog key until the desired selection is
P — P
or . indicates that the
indicates that the track can be selected.
prog key until the
numeric keypad followed each time
prog key. During deletion the track
indicates that the track deleted,
prog followed by 1. Similarly,
prog followed by 2.
prog while the player
stop
18.1 Introduction
NARCOM 3 is a multi-functional remote control handset
designed to be used with Naim Audio CD players,
integrated amplifiers, preamplifiers and preset tuners.
The handset control configuration is based around three
types of keys: System Component Keys, Global Keys and
Soft Keys.
18.2 System component keys
These keys switch
the operation of the
Soft Keys into modes
appropriate to each
system component
(CD, tuner, preamp,
record).
cd: Switches the
action of the Soft Keys
to that appropriate for
a CD player.
tuner: Switches the
action of the Soft Keys
to that appropriate for
a preset tuner.
preamp: Switches the
action of the Soft Keys
to that appropriate
for an integrated or
preamplifier.
record: Switches
the action of the
Soft Keys to select
record inputs on
appropriately equipped
numeric
preamplifiers.
18.3 Global Keys
These keys operate specific component functions regardless of
the System Component Key setting.
Preamplifier
vol (5 & 6)
mute
C
—
indicates
bal (3 & 4)
key.
System System
component component
keys keys
Global keys Global keys Global keys
(Preamplifier) (Preamplifier)
Global keys Global keys Global keys
(CD Player) (CD Player)
Global keys Global keys Global keys
(Tuner) (Tuner)
Soft keys Soft keys Soft keys
Adjusts the preamplifier volume and the volume
control position.
Reduces the preamplifier volume to zero. A second
press restores the volume.
Adjusts the channel balance. Some Naim
amplifiers have control of channel balance
available only from the remote handset. On these
products the balance will automatically centre
as it reaches the mid point. Centring is indicated
by a flashing volume control indicator. To resume
adjustment once the balance has centred, the
key must be released and re-pressed.
bal