Heat Pump Mode Operation; Night Mode Operation - Pioneer Pyz012Azudcipd Owner's Manual

O
PERATIONAL
Heat Pump Mode
Heating Mode Button Control:
is mode heats the room air it draws in and supplies it back into the vehicle.
Press the On/O button to switch the
Press the Change Mode button to
MODE
Use the temperature selection buttons to
select the desired set point temperature.
Press the fan speed button to select low,
FAN+
medium, high, or automatic speed
FAN-
Note: Auto Fan speed is determined by the di erence between set and room temperature.
e selected con guration will be retained in the system's
memory when it is switched on again next.

Night Mode Operation

Night Mode Button Control:
Night mode is generally meant for periods of lower comfort
requirements, such as during typical sleeping hours.
will result in decreased energy use, and can only be activated via
remote control.
Press the On/O button to switch the
Press the Change Mode button to
MODE select the desired operation mode
Use the temperature selection buttons to
select the desired set point temperature.
Press the night mode button to turn
SLEEP
e system automatically keeps the fan
FAN+
speed to low when using this mode
FAN-
e selected con guration will be retained in the system's
memory when it is switched on again next.
is mode sets the ventilation on low speed therefore it is
not possible to switch to the other available options.
14
I
NSTRUCTIONS
machine on or o
select HEAT PUMP mode
is mode
machine on or o
this feature on or o
support@pdhvac.com | (800)-675-7410 | https://www.pdhvac.com/support/
MODE
FAN- FAN+
HEATER SLEEP
CLOCK TIMER
0 C / 0 F
LOCK LIGHT
MODE
FAN- FAN+
HEATER SLEEP
CLOCK TIMER
0 C / 0 F
LOCK LIGHT