Description Of The Controls - Pioneer Pyz012Azudcipd Owner's Manual

O
PERATIONAL

Description of the Controls

Selecting the Functional Mode:
Press the MODE button to cycle between the available states on the machine.
After two seconds have elapsed, the system will con rm the selection with an
audible beep from the machine's speaker. Always point the remote controller
toward the control panel when sending commands to ensure the best reception.
NOTE: When rst switching on the system, the machine will stay in standby
mode for a few minutes before the compressor begins operating.
Automatic
Fan Speed
Electrical Heat*
Air ow Direction
On/O
Fan Speed (-)
(No Current
Function)
Clock Con guration
Lock Toggle
Louver Swing
Unavailable)
*indicates optional function
support@pdhvac.com | (800)-675-7410 | https://www.pdhvac.com/support/
I
NSTRUCTIONS
Cooling Mode
Auto Fan
Mode
Night
Mode
Light*
FAN-
HEATER
CLOCK
LOCK
(Function
Dehumidi cation
(Dry) Mode
Ventilation
Mode
MODE
FAN+
SLEEP
TIMER
C / F
0
0
LIGHT
Heat Pump Mode
Set Point
Clock and Timer
Lock Indicator
Temperature
Selection (+)
Change Mode
Fan Speed (+)
Temperature
Selection (-)
Sleep Mode
Timer On/O
Toggle Celsius
or Fahrenheit
Light and LED Strip
Control Button
In cooling or heating mode, the
operation of the LED strip can be
controlled using the SLEEP button.
e LED strip will cycle continuously
through the following sequence:
"o on white blue yellow o ."
Note: e LED strip cannot be
controlled while in dry mode.
11