An audible alarm will sound if the freezer temperature
unsafe levels. The alarm operates on household electricity. If the
power fails, the alarm will not perform.
An ON/OFF switch allows the high temperature alarm to be deac-
tivated if desired. NOTE: You must open the freezer door to view
the alarm switch. The freezer is shipped with the switch in the
OFF position. After the freezer has run long enough to lower the
temperature, you may set the switch to the ON position.
To activate the alarm, set the switch to the ON position.
To deactivate the alarm, set the switch to the OFF position.
High-Temp Alarm Switch
(SOME CHEST MODELS)
iMPORTANT: it is time to defrost and clean the freezer when the
blue defrost button is completely covered with frost.
A Slide-Out Basket (some models) or Trivet (some mod-
els), located at the bottom of the freezer, provides sepa-
rate storage space for items that are difficult to store on
freezer shelves. To remove the basket or trivet, pull out and
The light comes on automatically when the door is opened.
To replace the light bulb, turn the temperature control to
OFF and unplug the electrical
cord. Replace the old bulb
with a bulb of the same wattage.
This shelf is located inside on the freezer door and pro-
vides additional storage space. To access an item, tilt top
of "basket" shelf down.
The Drop Front Shelf, located at the bottom of the freezer,
provides a separate compartment for small irregular
shaped items or large, bulky items. Lift the shelf front up
and out to remove.
(SOME UPRIGHT MODELS)
Multi-position adjustable interior shelves can be moved
to any position for larger or smaller packages. The ship-
ping spacers that stabilize the shelves for shipping may be
removed and discarded.
Adjustable Interior Shelves = Upright Models
Adjustable Interior Shetves - Upright Models
This basket helps organize odd-shaped items. To reach
other packages in the freezer, slide the basket aside, or lift
keep the various items stored
inyour baskets more organized.
To change the location of the
divider simply slide your basket
out, lift up on each end of the
divider until it is disengaged from
the basket, place divider in the
desired location (make sure it is
between two vertical wires) and
press down firmly on each end
until it snaps into place.