SIMPOOL AUTOMATIC Digital peristaltic pump ENGLISH 1. INTRODUCTION The Simpool Automatic pump is a digital peristaltic dosing pump designed for the automatic management of the dosage of swimming pools. Based on some simple parameters to be set, the pump is able to calculate by itself the dosage to be carried out and set the operating parameters to guarantee this daily dosage.
SIMPOOL AUTOMATIC Digital peristaltic pump ENGLISH MODELS Motor Flow rate Pressure Peristaltic Code Power Supply Type (l/h) (bar) tube ADS3002010000000 230 VAC 24 VDC Santoprene ADS3001010000000 230 VAC 24 VDC Santoprene ADS3003010000000 230 VAC 24 VDC Santoprene INSTALLATION KIT At the time of purchase of the pump, everything necessary for a correct installation is included with it, in particular: ▪...
SIMPOOL AUTOMATIC Digital peristaltic pump ENGLISH 3. FEATURES ELECTRICAL FEATURES Fuse: 1 A RIT – model 5x20 Power supply: 230VAC 50/60Hz USER INTERFACE The keys on the panel are as follows: • Up / Down: they allow Increment / Decrement, allowing you to change the numeric values and scroll through the lists of options for all the editable menu items.
SIMPOOL AUTOMATIC Digital peristaltic pump ENGLISH • Priming function Pressing and releasing the button in position II starts the priming of the pump, which lasts 60 seconds. Pressing and releasing the button again before the 60 seconds have elapsed stops priming. •...
SIMPOOL AUTOMATIC Digital peristaltic pump ENGLISH CONNECTOR BOX Before performing any maintenance on the pump, disconnect the power supply voltage of the machine! The casing has, on its lower part, the following electrical connections: • • Three-position switch for the following functions: : the pump is active (ON);...
SIMPOOL AUTOMATIC Digital peristaltic pump ENGLISH 4. HYDRAULIC CONNECTION ▪ Insert the bottom filter, or in any case the end of the suction tube, into the tank of the product to be dosed; ▪ Connect the suction pipe to the pump suction fitting (marked on the cover with ▲) and tighten the appropriate ring nut.
SIMPOOL AUTOMATIC Digital peristaltic pump ENGLISH 5. USER MENU INITIAL MENU’ 5.1.1 STATES AND ALARMS SHOWN During operation, the display indicates the operating status of the pump. The following reports may appear: DOSING Indicates that the pump is performing the set dosage. noINHIBIT Indicates that the pump is waiting for the inhibit signal from the circulation pump.
SIMPOOL AUTOMATIC Digital peristaltic pump ENGLISH 5.1.2 OPERATING INFORMATION During the DOSING operating state it is possible to view the pump setting parameters using the UP and DOWN scroll keys. Scrolling the menu starting from the DOSAGE state you will find the following menu instructions: DOSAGE mode ...
SIMPOOL AUTOMATIC Digital peristaltic pump ENGLISH • The number of hours per day at which the pump is set to calculate the necessary dosage by itself. The actual dosage of the pump for this number of hours per day must be guaranteed by an external system (inhibit and / or flow sensor) which must be regulated for the same number of hours per day, also consisting of several daily shifts, the total of which arrives at the number of hours set on the pump.
SIMPOOL AUTOMATIC Digital peristaltic pump ENGLISH PROGRAMMING MENU By pressing the ENTER key from any screen of the INITIAL MENU you enter the PROGRAMMING MENU. Access to the PROGRAMMING MENU is allowed by entering a 3-digit password. After entering the 3 digits, press ENTER to enter the first item of the PROGRAMMING MENU.
SIMPOOL AUTOMATIC Digital peristaltic pump ENGLISH 5.2.1 PROGRAMMING EXAMPLE The programming of this pump is characterized by being very simple and immediate, as it performs all the necessary calculations by itself to guarantee the necessary dosage. Let's see how the pump behaves with the following 2 examples which represent the 2 distinct operating modes of the pump: continuous dosing or time-pause dosing.
SIMPOOL AUTOMATIC Digital peristaltic pump ENGLISH 5.2.2 CALIBRATION PUMP In order for the pump to perform a correct dosage according to the parameters assigned, it is important to perform a calibration of the same, to take into account the actual flow rate in the conditions of use. For this purpose, use the PROGRAMMING MENU function.
SIMPOOL AUTOMATIC Digital peristaltic pump ENGLISH • if the signal is permanently recognized as not active (Lo fixed), it is the correct situation, then proceed to any verification to activate the signal; ➢ Status of the active signal (Inhibit ON): •...
SIMPOOL AUTOMATIC Digital peristaltic pump ENGLISH ▪ Pump materials in contact with the chemical product such as: foot strainer and injection valve must be checked and cleaned at least every three months. If the products are particularly aggressive increase the frequency of cleaning; ▪...
Need help?
Do you have a question about the AQUA SIMPOOL AUTOMATIC and is the answer not in the manual?
Questions and answers