Sunex Tools SX2302 Operating Manual

OPERATING MANUAL
Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . 33/4"
Blows per minute . . . . . . . . . . . . . . . . . 2300
Shank Diameter . . . . . . . . . . . . . . . . 0 .401"
Sound Pressure Level . . . . . . . . . . . . 98 dBA
Vibration Level . . . . . . . . . . . . . . . 4 .09 m/s
Maximum Air Pressure . . . . . . . . . . .90 PSIG
Air Inlet . . . . . . . . . . . . . . . . . . . . . . . 1/4" NPT
WARNING
ALWAYS READ INSTRUCTIONS
BEFORE USING POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
USER AND BYSTANDERS
ALWAYS WEAR HEARING
PROTECTION USER AND
BYSTANDERS
AVOID PROLONGED
EXPOSURE TO VIBRATION
SX2302
WARNING INFORMATION
•
SPECI FIC ATIONS
Recommended Hose Size . . . . . . . . .
Avg . Air Consumption . . . . . . . . . . . 5 .5 CFM
Length . . . . . . . . . . . . . . . . . . . . . . . . 11 .4"
Width . . . . . . . . . . . . . . . . . . . . . . . . . . 2 .2"
Height . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7"
2
Weight . . . . . . . . . . . . . . . . . . . . . . .6 .06 lbs
Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known to cause cancer, birth defects or
other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
Heavy-Duty Long Barrel Air Hammer
PARTS BREAKDOWN
•
⁄ " I .D .
3
8
WARNING
1
SX2302
© Copyright 2024, SUNEX Tools
rev. 12/09/24
®