8-channel digital output and 8-channel digital input data acquisition module (8 pages)
Summary of Contents for ICP DAS USA EC4-P16 Series
Page 1
EC4-P16 series Quick Start v1.0, Nov. 2024 Packing List In addition to this guide, the package includes the following items: EC4-P16 Resources How to search for ESI, manuals and spec Technical Support information on ICP DAS website. service@icpdas.com For Mobile Web www.icpdas.com...
Page 2
Connecting the Power and Host ※Switch on module and connect it to an EtherCAT network NOTE: It is recommended to use a dedicated network card and avoid connecting to network to prevent network storms(broadcast storm). ※Verify that LEDs 1) Connect the Host device to the IN port on module.
Page 3
1. I/O Devices Right click Scan Devices… 2. Click “OK” button 3. Choose the correct network device which is connected to Module and click “OK” button 4. Click “OK” to start scanning Click “OK” to activate the free run mode for TwinCAT system manager 5.
Page 4
Wire Diagrams Readback as 1 (+5 ~ +24 VDC) Readback as 0 (Open or < 5VDC) Sink To other To other cha nnels channels Source To other To other channels channels Readback as 1 (Close to GND) Readback as 0 (Open) +S5 V +S5 V To othe r...
Need help?
Do you have a question about the EC4-P16 Series and is the answer not in the manual?
Questions and answers