Analogue Tv Menu System - Sanyo CE32LD81 Instruction Manual

Instruction manual

Hide thumbs

Table Of Contents

Table of Contents

Main Menu

Channel List

Installation

Configuration

Timers

Language

TV Setup

Common Interface

Detailed information about Sound, Picture and Fea-

ture menus are in AnalogueTV Menu System section

on page 19.

Common Interface

• Press the "M" button to display the Main Menu and

button to highlight the "Common Inter-

use the

face" line and press the "SELECT" button.

Main Menu

Channel List

Installation

Configuration

Timers

Language

TV Setup

Common Interface

It is required to subscribe to a pay channel company

to view the pay channels of the Digital Terrestrial broad-

casting.

Obtain the Conditional Access Module (CAM) and the

Viewing card by subscribing to a pay channel company,

then insert those to the Television using the following

procedure.

1. Switch off the TV and unplug from the mains.

2. Insert the CAM, then Viewing Card to the slot that is

located in the terminal cover at the left-hand side of

the TV (from front view).

• The CAM should be correctly inserted, it is impossible

to insert fully if reversed. The CAM or the TV terminal

may be damaged if the CAM is forcefully inserted.

3. Connect the TV to the mains supply, switch

on and then wait for few moments until the

card is activated.

• Some CAMs may require the following set up. Please

set the CAM by entering the IDTV menu, Common

Interface then pressing the "SELECT" button. (CAM

set up menu is not displayed when it is not required.)

• To see the viewing contract information:

Enter IDTV; press the "M" button, then highlight Com-

mon Interface and press the "SELECT" button.

• When no module is inserted, "No Common Inter-

face module detected" message appears on the

screen.

• Refer to the module instruction manual for details of

the settings.