The following checklist will assist in the correction of most problems which you may encounter
with your unit.
Before going through the checklist below, refer to the connection and operating procedures.
The unit does not function.
The built-in micro computer has malfunctioned.
-+ Press the reset button of the CD changer.
The connecting cords are not connected properly.
The sound skips.
The CD changer is installed in an unstable location.
-+ Re-install it in a stable location.
The CD is dirty or defective.
--, Clean or replace it.
The disc magazine is not locked
Take out the disc magazine, press ;??, and re-insert the disc
in the CD changer.
magazine until it is locked securely.
The following indications will flash for about five seconds.
The disc magazine is not inserted in
Insert the disc magazine with CDs
the CD changer.
into the CD changer.
E - CIZ
No CD is inserted in the disc
Take out the disc magazine and insert
The CD is dirty.
Clean the CD.
The CD is inserted upside down.
Insert the CD correctly.
The CD changer cannot be operated
Press the reset button of the CD
because of some problem.
If the solutions mentioned above do not help to improve the situation, consult your nearest Sony