Sinoboom 0407EN Operation Manual

Hide thumbs Also See for 0407EN:

Maintenance manual (113 pages)

Table Of Contents

Table of Contents

Quick Links

Download this manual

0407EN&0607EN Operation Manual

Operation

Manual

Preface to Operation Manual

0407EN (0407EN/1530EN)

0607EN (0607EN/1930EN)

产品说明书

PRODU

C T MAN U AL

0109000100 to current

G T JZ

0109100100 to current

G T JZ

Manual No: 501091100002

Manual Version: A

October 2024

Translated version

0608E (2132E)

0808E (2732E)

Table of Contents

Need help?

Do you have a question about the 0407EN and is the answer not in the manual?

Questions and answers

Summary of Contents for Sinoboom 0407EN

Page 1 0407EN&0607EN Operation Manual Operation Manual No: 501091100002 Manual Version: A October 2024 Manual 产品说明书 Translated version Preface to Operation Manual PRODU C T MAN U AL 0407EN (0407EN/1530EN) 0109000100 to current 0607EN (0607EN/1930EN) 0608E (2132E) G T JZ 0109100100 to current...
Page 3 Operating, servicing and maintaining this vehicle or equipment can expose you to chemicals including engine exhaust, carbon monoxide, phthalates and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. To minimize exposure and avoid breathing exhaust, do not idle the engine except as necessary, service your vehicle or equipment in a well-ventilated area and wear gloves or wash your hands...
Page 4 E-mail: info@sinoboom.com (China) / sales@sinoboom.com (except China) Address: No.128, East Jinzhou Avenue, Ningxiang High-tech Industrial Park, Changsha, Hunan, China Postal code: 410600 Copyright©Hunan Sinoboom Intelligent Equipment Co., Ltd. Hunan Sinoboom Intelligent Equipment Co., Ltd. retains the right of final interpretation of the manual.
Page 5 To Users Thank you for choosing and using the machinery of Hunan Sinoboom In- telligent Equipment Co., Ltd. Use this machine only to transport tools to work locations and for performing tasks on the work platform. Only authorized personnel who have received appropriate MEWP training may operate this machine.
Page 6 Manual Revision History: Ver- Date Description sion Original issue October 2024...
Page 7 Applicable Models The manual applies to the following models and serial numbers: Metric Trade Imperial Trade Model Serial No. Name Name 0407EN 0407EN 1530EN 0109000100 to current 0607EN 0607EN 1930EN 0109100100 to current Note: • Check the machine model and serial number on the machine nameplate. The location of the name- plate can be found in the Decals Diagram section of the Operation Manual.
Page 9: Table Of Contents
Check Tires and Rims ....57 6.2 Platform Controller (Sinoboom Check Wheel Nuts ....58 Control System) .
Page 10 Maintenance ....59 Inspection and Preventive Mainte- nance Schedule ..... 60 © October 2024 0407EN&0607EN Operation Manual...
Page 11: Safety Warning Symbols And Signs
Indicates an imminently hazardous situation that, if not avoided, could result in minor or moderate injury or machine mamage. NOTICE Indicates information directly or indirectly related to personal safety, machine damage, or property loss. © October 2024 0407EN&0607EN Operation Manual...
Page 13 No smoking or open No smoking or open Lifting point Lashing point Tire ground pressure flames/sparks flames/sparks Forklift pocket position Close the chassis Tool or weight Fast/high speed Slow/low speed compartment © October 2024 0407EN&0607EN Operation Manual...
Page 14 SAFETY WARNING SYMBOLS AND SIGNS Do not use damaged Platform load capacity Respective load Engage the safety capacity of main strut power cords platform and platform extension © October 2024 0407EN&0607EN Operation Manual...
Page 15: Important Safety Rules
Without the written permission of Hunan Sinoboom Intelligent Sinoboom cannot foresee all the potential hazards re- Equipment Co., Ltd., this machine shall not be used in lated to this machine, so all parties involved should place high importance on safety issues.
Page 16: Operation Safety
Functional test : Make sure that all functions of the machine are working properly. It is forbidden to alter or modify the machine without the written permission of Hunan Sinoboom Intelligent Equipment Co., Ltd. © October 2024 0407EN&0607EN Operation Manual...
Page 17 In case of any failure, stop the machine im- mediately, label the machine ap- propriately, and contact the manufacturer or relevant department. • Never disassemble, modify or ret- rofit the machine or its parts. © October 2024 0407EN&0607EN Operation Manual...
Page 18 Table 2-1 Minimum Safe Distance Voltage Minimum safe (Phase to Phase, distance m (ft) 0 - 50 3 (9.8) 51 - 220 4 (13.1) 221 - 500 5 (16.4) © October 2024 0407EN&0607EN Operation Manual...
Page 19 • Do not allow oil, sludge or other slippery substances to remain on work shoes and platform floor. • Keep the platform floor unobstructed. © October 2024 0407EN&0607EN Operation Manual...
Page 20 In- forklifts, or other suitable creasing the windward area will equipment. lead to reduced machine stability. © October 2024 0407EN&0607EN Operation Manual...
Page 21 47 - 54 If wind speed exceeds 12.5 m/s (28 mph) after the platform has been raised, the platform should be retracted immediately, all power sources should be disconnected, and the machine should be stopped. © October 2024 0407EN&0607EN Operation Manual...
Page 22 • Understand braking distances at all travel speeds. When traveling at high speed reduce the travel speed before stopping. • Do not use the high speed setting when traveling in areas with © October 2024 0407EN&0607EN Operation Manual...
Page 23: Towing, Hauling And Lifting
• The machine can only be lifted from the specific position with lift- ing equipment with sufficient lift- ing capacity. Care should be taken to prevent the machine from col- liding with surrounding objects. © October 2024 0407EN&0607EN Operation Manual...
Page 24: Maintenance Safety
• If you need to replace parts, use only original parts specified by Si- noboom. Parts replaced during maintenance should be the same or equivalent to the original ma- chine's components. © October 2024 0407EN&0607EN Operation Manual...
Page 25 • If injury occurs due to high tem- perature and/or high pressure, seek immediate medical attention. If treatment is not carried out im- mediately, serious complications may result. © October 2024 0407EN&0607EN Operation Manual...
Page 26 Only approved non-flammable cleaning solutions should be used on the machine. • In case the machine catches fire, do not use the "water drenching method"; use a "dry powder extin- guisher" to extinguish the fire. © October 2024 0407EN&0607EN Operation Manual...
Page 27 Do not connect the battery directly to a power outlet. • If the battery becomes hot, de- formed, leaks, emits an unusual smell, or produces smoke during © October 2024 0407EN&0607EN Operation Manual...
Page 28 10 %) or battery under-voltage caused by long-term non-charging (battery with levels of less than 10 % not charged for more than three days), resulting in battery capacity attenuation and failure, are not covered by the warranty. © October 2024 0407EN&0607EN Operation Manual...
Page 29: Responsibilities Of Relevant Parties
3.3 TRAINER’S RESPONSIBILITIES • The trainer must be accredited by Sinoboom, have comprehensive knowledge training on the machine, and must have the required skills related to machine repair and maintenance. •...
Page 30 RESPONSIBILITIES OF RELEVANT PARTIES This Page Intentionally Left Blank © October 2024 0407EN&0607EN Operation Manual...
Page 31: Technical Parameters
TECHNICAL PARAMETERS 4.1 MACHINE SPECIFICATIONS Table 4-1 0407EN Specifications Metric Imperial Item Product Category Battery type Maintenance-free lead-acid battery Travel drive type DC motor Dimensions Maximum platform height, indoor 4.3 m 14 ft 1.3 in Maximum platform height, outdoor 3.8 m 12 ft 5.6 in...
Page 32 TECHNICAL PARAMETERS Table 4-1 0407EN Specifications (continued) Metric Imperial Item Platform lowering time (unloaded) 25 - 30 s Gradeability (2WD) 25 %/14 ° Maximum allowable inclination 3°/1.5° (front-rear/left-right) Turning radius (inner/outer) 0.1 m/1.48 m 3.9 in/4 ft 10.3 in Tire (spec/type) φ280x76 mm/solid...
Page 33 TECHNICAL PARAMETERS Table 4-1 0407EN Specifications (continued) Metric Imperial Item Allowable ambient temperature -20℃ – 40℃ -4℉ – 104℉ range (lithium battery) Maximum allowable relative 90 % humidity Store at -20℃ to 50℃ (-4℉ to 122℉) in a well-ventilated environment with Storage environment 90 % relative humidity (max.) (20℃...
Page 34 555 kg Maximum tire load 1224 lb Ground pressure 1000 kPa 145 Psi Environment Maximum allowable lateral force 400 N/200 N 90 lbf/45 lbf (indoor/outdoor) Maximum allowable wind speed 0/12.5 m/s 0/28 mph (indoor/outdoor) © October 2024 0407EN&0607EN Operation Manual...
Page 35: Function Speed
S≤0.55 m Braking distance Item Parameters (1.31 ft) Raise the platform (0407EN) 20 – 23 s a) The function speed depends on the start point and end point of the movement, rather than on the Raise the platform (0607EN) 24 – 28 s controls/switches.
Page 36 (starting timing) until the machine stops. Perform this maneuver for two times. Note: For some models with special configuration in Ja- pan, the machine cannot travel while elevated to operat- ing position. © October 2024 0407EN&0607EN Operation Manual...
Page 37: Pre-Operation Inspection
A pre-operation inspection must be performed before each operation, before resuming operations, and before changing operators, as well as after each repair. Please carefully check each item according to the content of this section. 5.1 BASIC MACHINE COMPONENTS 9 10 © October 2024 0407EN&0607EN Operation Manual...
Page 38: Machine Positions
2. Structure – check whether there are any abnormal- installed properly. Ensure that the rope anchor- ities in the equipment structure, such as dents, age points are safe and reliable with only one © October 2024 0407EN&0607EN Operation Manual...
Page 39: Functional Test
6) In travel and steer mode, the joystick controls position but the corresponding movement does travel and steer functions, while the platform lift- not stop, push in the emergency stop button to ing and lowering functions shall be disabled. stop the machine. © October 2024 0407EN&0607EN Operation Manual...
Page 40: Indoor/Outdoor Mode Verification
10) With the machine traveling in operating position, For indoor/outdoor mode setting method, please refer to the travel speed of the machine will be reduced Operation Instructions section. to the speed for the elevated position automatically. © October 2024 0407EN&0607EN Operation Manual...
Page 41: Controllers And Indicators
Neutral/OFF position Platform control position Key switch Set the switch to neutral position: the machine will be powered (ground/platform control selector off. switch) © October 2024 0407EN&0607EN Operation Manual...
Page 42 Scroll down the ground display screen Ground display screen ECU menu selection/setting interface Note: Machines with different configurations may be equipped with different main controllers, whose icons may have some subtle differences from those in the above diagram. © October 2024 0407EN&0607EN Operation Manual...
Page 43: Platform Controller
CONTROLLERS AND INDICATORS 6.2 PLATFORM CONTROLLER (SINOBOOM CONTROL SYSTEM) Fig. 2 Platform Controller (Sinoboom Control System) Table 6-2 Description Name Keep holding the switch – all functions will be enabled to Enable switch operate. Left turn thumb button Press the button to steer the machine to the left.
Page 44: Platform Controller
Press the button to steer the machine to the right. Left turn thumb button Press the button to steer the machine to the left. Keep holding the switch – all functions will be enabled to Enable switch operate. © October 2024 0407EN&0607EN Operation Manual...
Page 45 Travel and steer function enable button travel and steer mode will be enabled. Press the button, and the button light will illuminate and the Turtle speed button low travel speed mode will be enabled. © October 2024 0407EN&0607EN Operation Manual...
Page 47: Operation Instructions
2. Pull out the emergency stop button at the ground controller to the ON position. 3. Pull out the emergency stop button at the platform control position to the ON position. Uphill/downhill: 25 %/14 ° © October 2024 0407EN&0607EN Operation Manual...
Page 48: Charging The Battery
Charging lead-acid (maintenance required) batteries 1. Checking the battery level. • Check the battery level on the display screen of the platform controller. When the battery level is ≤ 20 %, the low battery alarm will be triggered © October 2024 0407EN&0607EN Operation Manual...
Page 49: Charger Led Description
For example: 36.0 (A). Note: The selected mode will not change when the ma- chine is turned off. When the machine is turned on, the previously selected mode is still selected. © October 2024 0407EN&0607EN Operation Manual...
Page 50 Notes: The “Abroad” in Country Selection screen of stick forward, and the platform will continue to rise Sinoboom control system refers to countries/regions to its maximum height in indoor mode. except China, Korea, Japan, EU, US and Australia.
Page 51: Lift And Lower The Platform
Activate platform lift and lower mode - Sino- boom control system: Move up the lift and lower/ • Sinoboom Control System: Move the lift and lower/ travel and steer function enable switch down, the in- drive and steer function enable switch, the indicator dicator under the switch will illuminate.
Page 52: Extend And Retract Platform
Sinoboom control system: 1. With the machine traveling in non-operating posi- tion, push up the high/low travel speed selector © October 2024 0407EN&0607EN Operation Manual...
Page 53: Fold And Unfold Platform
1. Depress the pedal #1, grasp and pull the guardrail of the platform extension back to retract the platform extension. 2. Release the pedal #1, and insert the platform exten- sion end into the slot #2 to secure it. © October 2024 0407EN&0607EN Operation Manual...
Page 54: Turning Off And Stopping
4. Close the platform controller guard to protect the Unfold the platform guardrails in the reverse order of the platform controller and its handles, switches and fold-down instructions. panels from damage by harsh environments. © October 2024 0407EN&0607EN Operation Manual...
Page 55: Transport And Lifting
3. Adjust the rigging equipment properly to avoid dam- age to the machine and keep the machine level. Transport 0407EN: 1. Adjust the machine to the transport position. X=545 mm (21.5 in) Y=483 mm (19.0 in) © October 2024 0407EN&0607EN Operation Manual...
Page 56 2. Drive the forklift forward to fully insert the forks into the pockets. 3. Lift the machine by 0.4 m (16 in) and then tilt the forks backward slightly to keep the machine stable. 4. Keep the machine horizontal when lowering the fork frame. © October 2024 0407EN&0607EN Operation Manual...
Page 57: Storage
10. For a machine stored for more than one and a half years, a comprehensive inspection and mainte- nance on the machine should be carried out before use, aging seals and filter elements should be re- placed as appropriate. © October 2024 0407EN&0607EN Operation Manual...
Page 59: Emergency Procedures
8.1 REPORTING ACCIDENTS emergency stop button to stop the machine. In case of any accident involving Hunan Sinoboom Intel- 8.3 EMERGENCY LOWERING ligent Equipment Co., Ltd. products, Hunan Sinoboom Intelligent Equipment Co., Ltd. must be notified immedi- ately.
Page 60: Emergency Towing
• The machine must not be towed/dragged Method 2 (for Sinoboom Control System): when the brake has not been released or the machine is started. 1. Place the machine on firm and level ground and se- cure the wheels with chocks to prevent the machine •...
Page 61 10. After towing, place the machine on firm and level ground and secure the wheels with chocks to pre- vent the machine from moving. 11. Turn on the machine, so the brake can be operated properly. © October 2024 0407EN&0607EN Operation Manual...
Page 63: Decals Diagram
DECALS DIAGRAM 27 16 10 9 11 12 14 15 16 only for CE only for ANSI&CSA only for CE © October 2024 0407EN&0607EN Operation Manual...
Page 67: Maintenance
For special environ- 10.2 TIRE ASSEMBLY ments or special operating requirements please contact Sinoboom for special oil. Check Tires and Rims Maintaining the tires and rims is essential for the normal and safe operation of the machine. The machine may tip over if a tire or a rim fails, so check the tires and rims •...
Page 68: Check Wheel Nuts
Hunan Sinoboom Intelligent Equipment Co., Ltd., the torque specified in Torque Specifications . following specifications should be adhered to: 7.
Page 69 Equipment Co., Ltd. recommends this task be per- formed by a factory-trained service technician, a person Pre-delivery Inspection recognized by Sinoboom as one who, by qualification, certificate and training, has successfully demonstrated The pre-delivery inspection shall be performed by quali- the ability and proficiency to service, repair and maintain fied Sinoboom technicians.
Page 70 1, 2 1, 2 fasteners Chassis assembly Chassis Chassis wear pads (at the 1, 2, 5 1, 2, 5 1, 2, 5, 8 connection with scissor arm) 1, 2 1, 2 1, 2 Tires © October 2024 0407EN&0607EN Operation Manual...
Page 71 1, 3, 10 guarding device and brake Emergency stop button (ground and 1, 3, 10 1, 3, 10 1, 3, 10 platform) Limit switches and power-off switch 1, 3, 10 1, 3, 10 1, 3, 10 © October 2024 0407EN&0607EN Operation Manual...
Page 72 1, 2 1, 2 1, 2 and covers Greasing and lubricating according to specifications Functional test of all systems Paint and appearance Inspection date stamped on the chassis Notify Sinoboom of machine ownership (change) © October 2024 0407EN&0607EN Operation Manual...
Page 73 6. Check for correct level, sealing and leaks 7. Labels complete, clear and secure 8. Check for appropriate dimensions/tolerances 9. Fully charged 10. Verify/perform 11. Replace the oil or filter element 12. Correctly lubricated 13. Inspect the carbon brush © October 2024 0407EN&0607EN Operation Manual...
Page 75 Phone: +61 484 118 324 E-mail: sales@sinoboom.com Korea Subsidiary Mexican Subsidiary Sinoboom Korea Co., Ltd. SINOBOOM LATIN AMERICA, S. DE R. L. DE C. V. E-mail: sales@sinoboom.com Camino a Napoles Km. 2+370(Ll) Phone: +82-10-2533-1831 entronque a brecha Km.1(Ll) del Ejido San...

This manual is also suitable for:

0607en 1530en 1930en

Sinoboom 0407EN Operation Manual

Quick Links

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Sinoboom 0407EN

Summary of Contents for Sinoboom 0407EN

This manual is also suitable for:

Table of Contents