Override Mode; Device Protection Function; Maintenance And Care - Bosch C40-Li Operating Instructions Manual

Charger Bosch C40-Li I Operating instructions
flash alternatively, the charger will try to automatically detect the battery voltage
(6 V or 12 V) in a complex measuring procedure.
After 1-3 minutes, the charger will detect whether the battery is a 6 V or 12 V battery
and switch to the appropriate 6 V mode or 12 V motorcycle mode.
4.6

Override Mode

If the charger detects that the connected battery is a 6 V battery and enters 6 V mode,
but the user is very sure that it is a 12 V battery, the user can press and hold the mode
button for 5 seconds to switch the charger to any 12 V charging mode.
CAUTION
I
Please only use this override mode if you are sure that the battery to be charged is a
12 V battery. The 12 V mode can charge the battery already from 3.75 V low voltage.
Therefore, a 6 V battery could be overcharged and further dangers (increased gas leak-
age, explosion, fire...) for humans and animals.
4.7

Device protection function

In the event of a short circuit on the charging cable, the fuse (5b) on the charging ca-
ble prevents damage to the device and the electrical system.

5 Maintenance and care

Always unplug the mains connector before cleaning the charger.
The device is maintenance-free.
1. Turn off the device.
2. Use a dry cloth to clean the plastic surfaces of the device.
3. Never use solvents or other aggressive cleaning agents.
4. The devices may only be repaired by qualified personnel with original spare parts in
order to maintain operational safety.
5. For 24 V battery, please use C70.
For EU Version:
Robert Bosch GmbH
Auf der Breit 4
76227 Karlsruhe
Phone: +49 0391 832 29671
E-Mail: kundenberatung.kfztechnik@de.bosch.com
For UK version:
Robert Bosch GmbH
Broadwater Park,
Uxbridge UB9 5HJ
Phone: 0344 892 0115
E-Mail: contact@uk.bosch.com
18
EN