Setting the clock
Press and hold DSPL until the clock indicator
flashes in the display.
(to set hour) or- (to set minute), and then
turn Jog dial.
Displaying the clock
To return t o the former display, press DSPL again.
Tuning in to a station
Band indicator Frequency
Press TU (TUNER) repeatedly
select the desired
FM2, FM3, AMI, or AM2).
(to move to higher frequencies) or
move to lower frequencies)
"STEREO appears on the display when an FM
station is broadcasting in stereo, and receiving
conditions are good.
*Seek Tuning and Manual Tuning
Press and hold
until seek Tuning starts.
The unit locatesastation automatically (SeekTuning).
search for a desired station
while increasing or decreasing the frequency step by
step (Manual Tuning).
To stop Seek Tuning, press
Monaural m o d e
When signals become weak, or FM reception becomes
poor, the unit automatically switches to Monaural mode
to reduce noise.
Local m o d e
Local mode allows you to tune in only
during Seek Tuning.
Press LO before you start seek tuning.
"LOCAL" appears on the display.
To return t o Distant mode, press LO again.
"LOCALdisappearsand theunittunesin toall receivable
Using preset stations
You must preset stations before you can tune in astation
using preset station number buttons.
TU (TUNER) Preset station buttons 1
PS/A. M E
Preset station number
Presetting stations automatically
Press TU (TUNER) repeateoly
se ect the oes red
band (FM1, FM2 FM3, AM1, or AM2)
Press and n o d PS/A.ME Jnti automatic presett ng
Tne unit aJtomatical y stores
After complet on of aLtomatic presetting tne
u n e s n to the stat on stored on preset station
b Jnon 1
To cancel automatic presetting, press PS/A.ME again
Checking t h e preset stations (Preset Scan)
Press PS/A.ME or ef y
Each preset station w 11 be tuned in for 5 seconds
To cancel Preset Scan, press PS/A.ME aga n or any
preset stat on oJtton