Chase Playback - Toshiba D-VR4 Owner's Manual

Recording

Chase Playback

You can begin playback from the
beginning of a program currently
being recorded. You will find this
function of great advantage on
long programs, as you do not have
to wait for the end of recording to
begin playback.
Notes:
• Chase playback is unable when
recording a DVD-RW/R disc and
video tape.
• Chase playback is unable when
recording in XP mode.
• Slow, Instant skip, Instant replay,
A-B repeat, and Frame advance
does not work during chase play-
back.
• Chase playback does not work
until 30 seconds of recording have
elapsed.
• If you press DISPLAY during
chase playback, the information
screen is displayed (see page 35).
60
2G10101A P55-P61
1
While recording a TV program on the DVD-RAM disc, press PLAY
to start chase playback.
The TV program as it is being recorded will played back.
2
Locate a scene you want through the following operations if nec-
essary.
Still playback:
Press PAUSE.
• To resume chase playback, press PLAY.
Fast forward/Review playback:
Press SEARCH 8/9. Every press SEARCH, it switches the
speed of the search.
• To resume chase playback, press PLAY.
• If the playback position catches up to within about 60 seconds,
chase playback resumes. It may differ depending on the
recording condition and search speed.
Locating a chapter:
Press SKIP 6/7 to locate a chapter that you want to watch.
• If you press SKIP 7 while playing back the newest chapter,
it starts playing back from about 15 seconds before the
recording position.
Locating a specific scene:
Press PLAY MODE enables you to do a Time Search or a
Chapter Search. (See page 37.)
3
Press STOP to end chase playback.
If you press STOP again, the recording stops.
60 2/25/05, 14:36