Asus HDAV1.3 - Xonar Slim Sound Card User Manual page 33

No Item
1 Support link
2 Display Area
3 HDMI mode
4 Sound Card mode
5 Setting Menu Panel
6 Information icon
7 Menu Open/Close
8 Audio/Video
configuration switch
9 Master Volume
10 Mute Button
11 SVN Button
12 DSP Mode
Description
Clicking this button will lead you to the ASUS official website.
This display area shows the 0-band signal meter, volume
level, and the status of the Dolby/DTS technologies, EQ, and
DSP modes. Note: this area just displays information, but is
not used to alter settings.
Click this button when you connect the Xonar HDAV .3 card
to an HDMI device.
Click this button when you connect the Xonar HDAV .3 card
to powered analog speakers or digital home theater systems,
etc.
This panel gives access to setting tabs, including Main
Settings, Mixer/volume, Effects, Karaoke/MagicVoice, and
FlexBass. (see the following details)
Clicking this icon will pop up driver's Information window.
Clicking this button will move the display area and reveal
the configuration area below. Clicking it again will move the
display area back down.
Click the corresponding switch to configure the related
settings while using the audio/video features.
This rotary knob controls the master playback volume. Drag
the small circle inside it to change the volume level.
Click this button to mute audio playback; it will display a red
light when playback is muted.
Click this button to enable the "Smart Volume Normalization"
feature for constant volume from all playback sources. It will
display a blue light when enabled.
These 4 buttons give access to quick sound effects
combinations for Music, Games, DVD Video, and effect-free
(Hi-Fi) modes.
ASUS Xonar HDAV .3
27