Hardware Upgrades
Replacing a Drive
Ä
✎
✎
2–14
CAUTION: To prevent loss of work and damage to the computer or drive:
■
If you are inserting or removing a hard drive, shut down the operating
system properly, then turn off the computer. Do not remove a hard
drive while the computer is on or in standby mode.
■
Before handling a drive, ensure that you are discharged of static
electricity. While handling a drive, avoid touching the connector. For
more information about preventing electrostatic damage, refer to
Appendix F, "Electrostatic Discharge."
■
Handle a drive carefully; do not drop it.
■
Do not use excessive force when inserting a drive.
■
Avoid exposing a hard drive to liquids, temperature extremes, or
products that have magnetic fields such as monitors or speakers.
le:
Only parallel advanced technology attachment (PATA) hard drives
can be installed on this computer.
Make sure to back up the data on the old hard drive before removing
it so that you can install the data onto the new hard drive.
www.hp.com
Hardware Reference Guide