Computer Setup-File - HP 6000 - ProLiant - 128 MB RAM Setup Utility Manual

Computer Setup—File
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 2 Computer Setup—File
Option
System Information
About
Set Time and Date
Flash System ROM
Replicated Setup
Default Setup
Apply Defaults and
Exit
Ignore Changes
and Exit
Save Changes and Exit Saves changes to system configuration or default settings and exits Computer Setup.
ENWW
Description
Lists:
● Product name
●
SKU number (some models)
● Processor type/speed/stepping
●
Cache size (L1/L2)
●
Installed memory size/speed, number of channels (single or dual) (if applicable)
● Integrated MAC address for embedded, enabled NIC (if applicable)
●
System BIOS (includes family name and version)
● Chassis serial number
●
Asset tracking number
● ME firmware version
●
Management mode
Displays copyright notice.
Allows you to set system time and date.
Allows you to update the system ROM with a BIOS image file located on a USB flash media device
or CD-ROM.
Save to Removable Media
Saves system configuration, including CMOS, to a USB flash media device or a diskette-like device
(a storage device set to emulate a diskette drive).
Restore from Removable Media
Restores system configuration from a USB flash media device or a diskette-like device.
Save Current Settings as Default
Saves the current system configuration settings as the default.
Restore Factory Settings as Default
Restores the factory system configuration settings as the default.
Applies the currently selected default settings and clears any established passwords.
Exits Computer Setup without applying or saving any changes.
Computer Setup (F10) Utilities 3