Page 2
Electronic Nutrition Scale Clear Unit Save Recal Tare • Thank you for purchasing ——The Smart Nutrition Scale. • In order to use our product safely and accurately, be sure to read the instruction manual before use. • After reading, please keep it properly for consult and reference at any time. •...
Page 3
The Smart Electronic Nutrition Scale Catalog How to use the electronic nutrition scale ..................How to insert and Remove the battery ..................... The features and the nutrients interface of the electronic nutrition scale ......... Features ............................Nutrients ............................Schematic diagram of LCD display ....................Operation and Function Instructions ....................
Page 4
Instructions of the Electronic Nutrition Scale • Please follow the procedure below to use this product • How to insert and Remove the battery • Your product's battery type is shown in the picture When installing the battery, put one Open the battery cover at the When you need replace the battery, side of the battery in first, and then...
Page 5
The features and the nutrients interface of the electronic nutrition scale Product Features Nutritional ingredient 1. Two weight units: g, lb: oz are available 2. Two volume units: ml, fl.oz are available 3. Low battery and overload prompt function 4. High precision sensor 5.
Page 6
Schematic diagram of LCD display L CD 显示 屏界 Food Code Calorie unit “CAL” Record Symbol Weight unit "gram" Cumulative Symbol Volume unit "ml" Negative Value Weight unit "lb:oz" Volume unit "fl.oz" Weighing Symbol...
Page 7
Operation and Function Instructions Button Instructions Key correspondence table Turns the scale ON and OFF Changes the weighing Unit unit Clear Clear data Save save data Clear Recal Unit View data Save Recal Tare Tare Zero's the scale...
Page 8
Simple Weighing Operation Steps Weighing Press the key to turn the scale on. When the display shows "0", gently place the item on the center of the weighing platform. The display will show the weight of the item. Press and hold the key to turn the scale off.
Page 9
Zero or tare function Press the key to turn the scale on. When the display shows "0", gently place an empty tray or container on the platform. The display now shows the container weight. container: 225g After the display screen shows the weight of the container, press the TARE key to subtract the container’s weight.
Page 10
Add the food to the container to see their weight on the display. container food co-weight: 660g Press and hold the key to turn the scale off. NOTE: After the tare weighing is completed, the display show "-" once the weight is removed, which indicate a negative value.
Page 11
The query method of food nutrition composition data Please follow the steps below: food code 「 」 Clear Unit Save Tare Recal • Put the food on the platform and press the number • In the tare state, first press •...
Page 12
Accumulation steps of food nutrition composition data—1 Please follow the steps below: food code 「 」 Clear Unit Save Recal Tare • Put the food on the platform and press the number • In the tare state, first press • The screen will show the key.
Page 13
Accumulation steps of food nutrition composition data—2 Please follow the steps below: • • • • Press Save to record Press Clear to clear Press Save to record Continue with the (save) the current data. the current food code. second weighing. (save) the current data.
Page 14
Accumulation steps of food nutrition composition data—3 Please follow the steps below: • • Long Press Clear to Clear • Press to clear the Continue with the clear the current food current food code. then Press second weighing. Recal code accumulation data. key to view previousy stored food accumulation data.
Page 15
Auto-off (Power Saving Mode) The product will automatically shut down if there is no operation or weight change for about two minutes. Warning tips: When the display shows "LO", the battery is low, please replace the battery. (Please refer to page 2 of the manual for the replacement method) When the display shows "Err", it means overload, please remove the weighing item to avoid damage to...
Page 16
Suggestions for use and maintenance Maintenance: 1. The traces of the weighing surface and the display can be wiped with a soft cloth or paper towel. 2. If there is dirt on the platform, use a cloth dampened with water or neutral detergent, wring it out and wipe it, and then dry it with a dry cloth with good water absorption.
Need help?
Do you have a question about the NS1-3000 and is the answer not in the manual?
Questions and answers