Related Manuals for Gorenje GW761UX
Summary of Contents for Gorenje GW761UX
- Page 1 GW761UX GW750 567686 GW951UX GW900 567687 GTW641UB GGW600 567688 GTW751UB GGW750 567700 GTW951UB GGW900 567701...
- Page 3 Dear customer! This appliance is manufactured for household use. Our appliances are packed in the environmentally friendly materials which may be recycled, deposited or destroyed without any hazard to the environment. Such packaging materials are also labeled accordingly. Once the life cycle your appliance is over, make sure not to pollute the environment, and deliver it to the authorized collectors of old household appliances.
-
Page 4: Important Warnings
IMPORTANT WARNINGS Installation of the appliance (installation class:3) into a kitchen worktop and its connection to the power mains and the • gas supply may only be performed by an adequately qualified technician. When the appliance is in use, additional heat and moisture are emitted into the room. When the appliance is used for a •... -
Page 5: Installation
INSTALLATION Important warnings Installation of the appliance into a kitchen worktop must be performed by an adequately qualified technician. • Veneer or other finish of the piece of kitchen furniture into which the hob is to be built in should be treated with heat •... -
Page 6: Connecting To The Power Mains
Installing the foam Before inserting the appliance into the opening in the kitchen worktop, the supplied foam gasket gasket must be attached to the lower side of the glass. Do not install the appliance without the foam gasket! The gasket should be attached to the appliance in the following way: Remove the protective film from the gasket. -
Page 7: Connecting To The Gas Supply
Connection diagram The following cable must be used for connection: H05RR-F – 3x1,5 mm • H07RN-F – 3x1,5 mm • H05V2V2-F – 3x1,5 mm • LIVE BROWN EARTH GREEN / YELLOW NEUTRAL BLUE CONNECTING TO THE GAS SUPPLY Connection to the gas supply, or conversion from one type of gas to another, should only be undertaken by an approved •... -
Page 8: Technical Information
When the installation is complete: Check that all couplings are completely sealed by using a soapy solution, never use • a flame; Ensure that the flexible pipe cannot come into contact with any moving part of the • cooktop (e.g. drawer) and that it is not in a position where it could be damaged; Check the burners for correct operation. -
Page 9: Conversion To Another Type Of Gas
NOZZLE TABLE FOR 60 VT, 90 VT AND 90 INOX BURNER Nominal Rate (kW) 1,00 1,75 3,00 3,30 3,80 Reduced Rate (kW) 0,45 0,70 1,00 1,50 1,80 Ø INJECTOR (mm) G30=30mbar 0,50 0,65 0,85 0,90 0,98 G20=20mbar 0,72-X 0,97-Z 1,28-H3 1,28-T 1,35-K Ø... -
Page 10: Operation
OPERATION Hob control elements Gas valve closed Ignition Maximum power Minimum power Ignition and operation of User’s instructions the burners This appliance must be used for the purpose it was designed for, i.e. domestic cooking. Any other use is considered to be improper and therefore dangerous. The manufacturer will accept no liability for any damage caused by improper, incorrect or irrational use. -
Page 11: Cleaning And Maintenance
CLEANING AND MAINTENANCE Do not use a steam cleaning appliance to clean this appliance. The steam could reach the electrical components and cause a short circuit. The appliance should be cleaned regularly, preferably after each use, after cooling down. • To avoid water marks and limescale deposits, use a soft cloth to dry surfaces that have •... - Page 12 Glass surface After each use of the glass surface, wait for it to cool down and clean it; otherwise, even the smallest food residue will be burnt onto the hot surface next time you use the appliance. For regular cleaning and maintenance of the glass surface, use special conditioning agents that form a protective layer on the surface, shielding it from dirt.
-
Page 13: Problem Solving Guide
PROBLEM SOLVING GUIDE During the warranty period, maintenance and repairs must only be carried out by a suitable qualified and competent • person authorized by the manufacturer. Before making any repairs, make sure the appliance is disconnected from the power mains either by removing the fuse •...
Need help?
Do you have a question about the GW761UX and is the answer not in the manual?
Questions and answers