Access Panel - Compaq 141536-002 - Deskpro EN - MT RAMBUS Maintenance And Service Manual

Convertible minitower models
Hide thumbs Also See for 141536-002 - Deskpro EN - MT RAMBUS:
Table of Contents

Advertisement

4.6

Access Panel

1. Prepare the computer for disassembly (Section 4.2).
WARNING: Power is continuous to the system board and power supply even when the power
switch is turned off. To prevent damage to the unit, disconnect the power cord from the power
source or the unit before beginning disassembly procedures.
2. Lay the computer down on its large base (side with feet) for greater stability.
3. Loosen the two thumbscrews that secure the access panel to the back of the computer
chassis.
4. Slide the access panel backward approximately 1-inch (2.5-cm); then lift it up and off
the unit.
To replace the access panel, reverse the previous steps.
Compaq Deskpro EN Series of Personal Computers
4-5

Advertisement

Table of Contents
loading

Table of Contents