Bios/Jumper Settings - Asus S-presso User Manual

1.1.3 1.1.3

BIOS/Jumper settings

BIOS/Jumper settings
1.1.3 1.1.3 1.1.3 BIOS/Jumper settings BIOS/Jumper settings BIOS/Jumper settings
Instant On does not support Serial ATA optical drives.
Make sure you make the following BIOS and jumper settings before
installing Instant On to your hard disk drive.
IDE hard disk drive and IDE optical drive IDE hard disk drive and IDE optical drive IDE hard disk drive and IDE optical drive IDE hard disk drive and IDE optical drive IDE hard disk drive and IDE optical drive
1. Set the HDD jumper to M A S T E R
2. Set the ODD jumper to M A S T E R
3. Make the following BIOS settings:
• Set your hard disk drive as Primary IDE Master.
• Set your optical drive as Secondary IDE Master.
System Time
System Date
Language
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Third IDE Master
Fourth IDE Master
IDE Configuration
System Information
4. In the IDE Configuration sub-menu, set the O n b o a r d I D E
O p e r a t e M o d e O p e r a t e M o d e
O p e r a t e M o d e item to [Enhanced Mode]. O p e r a t e M o d e O p e r a t e M o d e
IDE Configuration
Onboard IDE Operate Mode
Make sure that your optical drive is set as the 1st Boot Device.
A S U S S - p r e s s o A S U S S - p r e s s o A S U S S - p r e s s o
A S U S S - p r e s s o A S U S S - p r e s s o
M A S T E R M A S T E R
M A S T E R. M A S T E R
M A S T E R. M A S T E R M A S T E R M A S T E R
[11:10:19]
[Tue, 01/10/2005]
[English]
[Maxtor 6Y080L0]
[Not Detected]
[ASUS CDS520/]
[Not Detected]
[Not Detected]
[Not Detected]
O n b o a r d I D E O n b o a r d I D E
O n b o a r d I D E O n b o a r d I D E
[Enhanced Mode]
1 - 3 1 - 3 1 - 3
1 - 3 1 - 3