ATX power connectors (24-pin EATXPWR, 4-pin ATX12V)
These connectors are for ATX power supply plugs. The power supply plugs are
designed to fit these connectors in only one orientation. Find the proper orientation and
push down firmly until the connectors completely fit.
P8H6110L/P6-P8H61E/DT_MB ATX power connectors
For a fully configured system, we recommend that you use a power supply unit
(PSU) that complies with ATX 12 V Specification 2.0 (or later version) and provides a
minimum power of 200W~250W.
DO NOT forget to connect the 4-pin ATX12V power plug; otherwise, the system will
Use of a PSU with a higher power output is recommended when configuring a system
with more power-consuming devices. The system may become unstable or may not
boot up if the power is inadequate.
The ATX 12 V Specification 2.0-compliant (200W~250W) PSU has been tested to
support the motherboard power requirements.