Advertisement
Please charge the unit before using it for the first time to extend the battery life. Use a 5V,1A (or 2A) cellphone charger to charge it.
When charging, the power indicator will flash which indicates the machine is charging. The Power indicator turns off after charging is completed.
Suitable for:
Power button
Turn power ON or OFF. Press and hold for 2 seconds to turn ON the power supply, and then press the intensity button, the machine will start to work. The default massage run time is 15 minutes, the power will be turned OFF automatically after 15 minutes.
Intensity button
The default value is L3, with a total of 5 levels of intensity.
You can select it from L3 - L4 -L5 - L1 - L2 in sequence.
L1 is weakest and L6 is strongest.
Mode key
The default model is P1, with a total of 5 modes available.
You can choose your favorite mode to massage, which is from P1 - P2 - P3 - P4 - P5 - P1 in sequence.
Vibration button
Press it to turn ON/OFF the vibration.
There are 2 modes of vibration. You can choose according to your requirement.
Heating key
Press it to turn on/turn off the heating.
5 minutes later, the inner temperature will go up obviously.
Unusual Circumstances | Possible Causes | Method of Processing |
Unable to start product | Battery drain | Please recharge battery |
Unit not starting up correctly | Press and hold power button for 2 seconds | |
There's a faint sound while using | Sound of air pump (buzzing) | This is a normal sound and not a fault |
Sound of solenoid valve (tick) |
Features:
What's in the Box:
Technical Specs:
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
www.SereneLifeHome.com
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the SLHNDMSG85 and is the answer not in the manual?
Questions and answers