Troubleshooting An Optical Drive - Dell PowerEdge E07S Series Owner's Manual

Troubleshooting an Optical Drive

CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Try using a different CD or DVD.
2 Enter the System Setup program and ensure that the drive's controller is
enabled. See "Entering the System Setup Program" on page 54.
3 Run the appropriate online diagnostic test. See "Running the System
Diagnostics" on page 161.
4 Turn off the system and attached peripherals, and disconnect the system
from the electrical outlet.
5 Open the system. See "Opening the System" on page 78.
6 Ensure that the interface cable is securely connected to the optical drive
and to the controller.
7 Ensure that a power cable is properly connected to the drive.
8 Close the system. See "Closing the System" on page 79.
If the problem is not resolved, see "Getting Help" on page 169.
156
Troubleshooting Your System
Many repairs may only be done by a certified service technician. You