Troubleshooting Power Supply; Troubleshooting System Cooling Problems - Dell PowerEdge E07S Series Owner's Manual

Troubleshooting Power Supply

CAUTION:
At least one power supply must be installed for the system to operate.
Operating the system with only one power supply installed for extended periods of
time can cause the system to overheat.
1 Reseat the power supply by removing and reinstalling it. See "Power
Supplies" on page 125.
NOTE:
to recognize the power supply and to determine if it is working properly. The
power indicator turns green to signify that the power supply is functioning
properly.
2 If the problem persists, replace the faulty power supply.
If the problem is not resolved by replacing the power supply, see "Getting
Help" on page 169.

Troubleshooting System Cooling Problems

CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
Ensure that none of the following conditions exist:
• System cover, cooling shroud, drive blank, power-supply blank, or back
filler bracket is removed.
• Ambient temperature is too high.
• External airflow is obstructed.
• An individual cooling fan is removed or has failed. See "Troubleshooting a
Fan" on page 152.
After installing a power supply, allow several seconds for the system
Troubleshooting Your System
151