Using the Digital Media
Controller
You can use the smartphone, etc. as the Digital
Media Controller (DMC) to play back contents
from DLNA server on the Renderer (this unit).
Possible applications:
*
Server
Renderer
*
Controller
*
Server
+
Renderer
Controller
* DMC compatible software should be installed.
Preparation
Perform steps 1 to 3. (
left )
4 Perform the “Remote Device Settings”. (
30)
≥ You can register up to 16 devices.
1
Press [HOME].
2
Select “Network”.
3
Select “Home Network”.
4
Select “Media Renderer”.
5
Select “Home Network” or “Wi-Fi Direct”,
then follow the indications on the screen.
6
Operate the DMC compatible devices.
To exit from Media Renderer screen
Press [HOME].
For more details, refer to the following website
and the operating instructions for each of the
equipment.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
≥ Wi-Fi Direct connection while using Home Network feature
is only temporary, and the network connection method
returns to the original setting when exiting.
≥ Depending on the contents and the connected equipment,
playback may not be possible.
≥ Items displayed in gray on the display cannot be played
back by this unit.
≥ This unit can be played back via connected equipment only
when controlled using DMC.
Page 22