Inserting or removing
Playback
media
Inserting disc in the disc slot
≥ The disc will be pulled in when inserted partially.
≥ The power will be turned on automatically when
the disc is inserted while in the standby mode.
To eject the disc
Touch [<].
≥ Remove the disc with your hands once the disc
is ejected partially. If the disc is not removed,
the unit will pull in the disc for safety reasons. In
this case, playback does not start automatically.
Notes
≥ When inserting a media item, ensure that it is
facing the right way up.
≥ To insert the disc that was ejected partially, do
not force the disc back in, but re-insert it after
removing the disc completely.
≥ Do not leave the disc that is ejected partially. It
is recommended to completely take out the disc
from this unit if the disc is not planned to be
used.
≥ When removing the SD card, press the center
of the card and pull it straight out.
≥ If you connect a Panasonic product with a USB
connection cable, the setup screen may be
displayed on the connected equipment. For
details, refer to the instructions for the
connected equipment.
≥ Use the front USB port when you connect a
USB memory or a USB HDD. The USB port on
the rear panel is only for the Communication
Camera.