JVC BD-X200U - Dvd Authoring Recorder Instructions Manual page 83

RECORDER MENU (2/2) screen
Parameter Possible settings
Y/C TERMINAL
MODE
Y C TM
THUMBNAIL
FORM
THUMB
[1,2ch † 1,2ch]
AUDIO
3,4ch † 1,2ch
CHANNEL (DV)
DV CH
AUDIO REC VOL.
MODE INDEPENDENCE
VRMODE
DISC IN ACTION
DISCIN
TITLE END
TI END
BACK
S1 This parameter is used to set the specification for the DVD recorder's VIDEO Y/C
INPUT terminal in order to enable the recording of wide-screen discrimination signals.
[S2]
S1 : S1 terminal mode is to be adopted. A discrimination signal for normal video
with a 4:3 aspect ratio and squeezed video is to be recorded.
S2 : S2 terminal mode is to be adopted. A discrimination signal for normal video
with a 4:3 aspect ratio, squeezed video, and letterbox video is to be recorded.
S1
Squeezed video : 16:9 wide-screen content with the left and right sides
[S2]
Letterbox video : Content with the top and bottom of the screen blackened out.
Thumbnail creation method for chapter and title menus during wide-signal recording
[NORMAL]
is selected.
V CUT
H CUT NORMAL : The input signal is to be converted into thumbnails without modification.
V+H CUT
V CUT
[NOR]
VCUT H CUT
HCUT
V+H V+H CUT : In this case, the top, bottom, left, and right of the video content is to be
This parameter is to be set when recording an audio signal from the DV IN/OUT
terminal.
Specifically, it indicates whether the signals from channels 1 and 2 or from channels
3 and 4 are to be recorded. (Only available for 32 kHz)
[1 2]
1,2ch † 1,2ch : Channels 1 and 2 are to be recorded.
3 4
3,4ch † 3,4ch : Channels 3 and 4 are to be recorded.
[BOTH] This parameter is used to select the method for adjustment of audio recording levels.
Specifically, both channels can be adjusted while maintaining the same level, or
each channel can be adjusted independently.
BOTH
[BOTH]
INDE
INDEPENDENCE : Both channels are to be adjusted independently.
This parameter is used to indicate the action to be taken when a completed (i.e.,
[MENU]
finalized) disc is inserted into this DVD recorder or another DVD player. In order to be
TITLE
effective, this setting must be made during the recording process.
[MENU] MENU : The title menu is to be displayed.
TITL TITLE : Playback of the main content is to begin.
This parameter is used to indicate the action to be taken when playback of a title on
[MENU]
REPEAT a completed (i.e., finalized) disc has ended. In order to be effective, this setting must
be made during the recording process.
[MENU] MENU
REPT REPEAT : Playback is to be repeated within the current title.
This button is used to return to the RECORDER MENU (1/2) screen.
Description
compressed for normal aspect screens.
If the input video has an aspect ratio of 4:3, the corresponding thumbnails
are also to have this aspect ratio.
: In this case, the top and bottom of the video content is to be removed to
form thumbnails.
: In this case, the left and right of the video content is to be removed to
form thumbnails. (SQUEEZE)
removed to form thumbnails. (LETTER BOX)
: Both channels are to be adjusted while maintaining the same
level.
: The title menu is to be displayed.
81