Download  Print this page

Installation Tasks; Recommended Tools And Supplies - Dell PowerEdge 4220 Installation Manual

Server rack installation guide.
Hide thumbs


Rack Stabilizer Feet
installed could cause the rack to tip over, potentially resulting in bodily injury
under certain circumstances. Therefore, always install the stabilizer feet before
installing components in the rack.
out of the rack on its slide assemblies at one time. The weight of more than one
extended system could cause the rack to tip over and cause injury.
The stabilizer feet help prevent the rack from tipping over when a system or
other component is pulled out of the rack with the slide assemblies fully

Installation Tasks

Installing a rack cabinet involves performing the following tasks:
1 Removing and replacing the rack doors
2 Removing and replacing the side panels
3 Reversing the front door and badge (optional)
4 Securing the leveling feet
5 Installing the stabilizer feet
6 Adjusting the rack posts (optional)
7 Routing cables through the rack
8 Coupling two racks (optional)

Recommended Tools and Supplies

You may need the following tools and supplies to install the rack:
#2 Phillips screwdriver
Flat head screwdriver
12-mm wrench
Needle-nose pliers
4-mm Allen wrench (if you want to reverse the direction that the front
door opens)
Keys to the rack doors and side panels
13-mm wrench (for rack removal from pallet)
17-mm wrench (for rack removal from pallet)
Installing systems in a rack without the front and side stabilizer feet
After installing systems in a rack, never pull more than one system
Installation Guide



Table of Contents

   Related Manuals for Dell PowerEdge 4220

Comments to this Manuals

Symbols: 0
Latest comments: