Dell PowerEdge 2420 Installation Manual page 11

3 While holding the hinge pin out of the door's hinge-pin housing, pull
the door slightly away from the rack so that the door clears the hinge body.
4 Release the hinge pin.
5 Lift the door upward so that the door clears the bottom hinge post
WARNING:
the removed door flat with the outer surface facing upward.
6 Lay the door in a safe location with the door's outer surface facing upward.
Laying the door flat with the outer surface facing upward will help prevent
damage to the door's badge and cosmetic coating.
Replacing the Front Door
To replace the front door, perform the steps for removal in reverse.
Opening and Removing the Back Doors
1 Turn the door handle and open the back doors (see Figure 1-2).
Figure 1-2. Opening the Back Doors
1
Due to the size and weight of the door, it is recommended that you lay
door handle 2 back door (2)
Installation Guide
1
2
9