Huawei LCA-B10 Manual page 15

3. Once a measurement is complete, the device will automatically deflate and display the measurement
result.
Note: Measurement indicators include the 24-hour average value, daytime average value, nighttime average
value, maximum value, minimum value, median, standard deviation, number of measurements, blood pres-
sure load, coefficient of variation, nocturnal blood pressure dipping, and morning blood pressure surge.
2.8 Stopping a Blood Pressure Measurement
• During a blood pressure measurement, press the Up button or touch the cancel button on the screen to
exit the measurement.
• The system will automatically stop a measurement once it is complete.
Notes:
• If the device does not automatically deflate after a blood pressure measurement, please unfasten the
strap.
• To restart or turn off the device, press and hold the Up button until the device screen displays restart and
shutdown options and select an option as needed.
• The device can display the results of the last 100 single blood pressure measurements and the last 300
ambulatory blood pressure measurements.
• If the device is restored to its factory settings, all of your data will be deleted. The only way to delete data
is to restore your device to its factory settings.
• In this guide, high pressure refers to systolic blood pressure, and low pressure refers to diastolic blood
pressure.
ABPM
X%
XXX/XX
XXXXXX
XXXXXX
14