Electrical Specifications; Unit Specifications - Danby Premiere DDR7009REE Owner's Use And Care Manual

1) All wiring must comply with local and national electrical codes and be installed by a qualified electrician.
If you have any questions regarding the following instructions, contact a qualified electrician.
2) Check available power supply and resolve any wiring problems BEFORE installation and operation of this
unit.
3) For your safety and protection, this unit is grounded through the power cord plug when plugged into a
matching wall outlet. If you are not sure whether the wall outlets in your home are properly grounded, please
consult a qualified electrician. DO NOT USE PLUG ADAPTERS OR EXTENSION CORDS.
4) The manufacturers nameplate is located on the rear wall of the water tank compartment. The nameplate
contains electrical and other technical data specific to this unit.
5) To avoid the possibility of personal injury, always disconnect the power supply before attempting to clean
and/or service the unit.
Model Number:
Dehumidifying Capacity (Pints/ Liters)
Electrical Requirements
Power Input (Watts)
Rated Amperage (Dehumidifying)
Air Flow Circulation- High Fan Speed
(Cubic Feet per Minute)
Type of Refrigerant
Water Tank Capacity (Pints / Liters)
Operating Noise Level (dB A)
Unit Dimensions (W x H x D)
Net Weight (kg / lbs)
NOTE: Specifications are subject to change without notice, for further improvements.

ELECTRICAL SPECIFICATIONS

UNIT SPECIFICATIONS

DDR5009REE
50 / 23.7
115 V / 60 Hz
600
5.5
238
R-410A
14.2 / 6.8
54.8
15 4 / " x 23 10 / " x 11
16 16
16.2 / 35.8
DDR6009REE
60 / 28.5
115 V / 60 Hz
640
6
294
R-410A
14.2 / 6.8
55
2 / " 15 4 / " x 23 10 / " x 11
16 16 16
19.5 / 43
4
DDR7009REE
70 / 33
115 V / 60 Hz
770
7
324
R-410A
14.2 / 6.8
55.3
2 / " 15 4 / " x 23 10 / " x 11 2 /
16 16 16 16
19.7 / 43.4
"